OctConf 2017
OctConf 2017 will take place at CERN, Geneva, Switzerland for three days from March 20 through March 22. To register officially, please use the CERN conference manager Indico. In addition, *please* add your name to the Participants section of this page so we can plan appropriately.
Location
Geneva, Switzerland
Venue
The upcoming Octconf 2017 will take place at CERN (European Center for Nuclear Research)
At CERN, the European Organization for Nuclear Research, physicists and engineers are probing the fundamental structure of the universe. They use the world's largest and most complex scientific instruments to study the basic constituents of matter – the fundamental particles. The particles are made to collide together at close to the speed of light. The process gives the physicists clues about how the particles interact, and provides insights into the fundamental laws of nature. The instruments used at CERN are purpose-built particle accelerators and detectors. Accelerators boost beams of particles to high energies before the beams are made to collide with each other or with stationary targets. Detectors observe and record the results of these collisions.
Founded in 1954, the CERN laboratory sits astride the Franco-Swiss border near Geneva. It was one of Europe's first joint ventures and now has 22 member states.
Travelling
The information below is taken from CERN instructions. Please check that link for further details.
How to get to CERN infographics
CERN Reception - Meyrin
CERN - European Organization for Nuclear Research 385 route de Meyrin CH-1217 Meyrin - Geneva Switzerland
- GPS Coordinates
Latitude: 46.2314284
Longitude: 6.0539718
By train
Coming from the Geneva railway station at Cornavin
Tram - Take the number 18 tram to "CERN" which is the final stop at the CERN entrance.
Ticket costs 3 CHF full-fare / 2 CHF reduced-fare (Ticket "Tout Genève" on the ticket machine).
See the TPG web site for full details.
By car
- From Switzerland
Follow signs for "Aéroport", "Lyon" and "Meyrin".
Once you are in Meyrin, follow signs for "St. Genis" (which is just beyond the border, in France).
Before reaching St Genis, the CERN site is on your left on "Route de Meyrin", just before you reach the border.
- From France (département of Ain)
Follow signs for "Gex" or "St. Genis". When you reach the border, CERN is on your right immediately after passing through customs.
See Parking for parking information.
By plane
Coming from the Geneva International Airport at Cointrin
Taxi - approximately 35CHF.
Bus - First take a public transport ticket from the machine you will find at the exit to the baggage collection hall, just before customs control. Then:
Option 1: Take bus Y direction "CERN" and get off at the CERN stop opposite the large Globe and the CERN site.
Option 2: Take bus 23, 28 or 57 and get off at the stop "Blandonnet" and then catch the Tram number 18, final stop "CERN".
See the TPG web site for full details.
Dates
The conference will run for three days from Monday, March 20th through Wednesday, March 22nd.
Suggestions for Sessions
Approximately half of each day will be devoted to presentations. The remainder will be used for informal discussions, code sprints, etc.
Please propose session topics in the schedule below. The actual time slot you pick is not important--we can re-arrange the schedule later--but we need to know what topics are of interest.
In addition, if you have a poster, rather than a full presentation, there is a separate sign-up sheet below.
Schedule
During the daytime: CERN offers many areas where people can socialize and/or discuss, informally. For instance, the CERN main restaurant is open until 23:00 (11:00 PM).
| Time | Monday (General GNU Octave day) |
Tuesday (GNU Octave Packages day) |
Wednesday (Libre and Open Source Software day) |
|---|---|---|---|
| 9:00-9:30 | Open Slot | Open Slot | Unconference |
| 9:30-10:00 | Open Slot | Open Slot | |
| 10:00-10:15 | Coffee | Coffee | Coffee |
| 10:15-10:50 | Open Slot | Open Slot | Unconference |
| 10:50-11:25 | Open Slot | Open Slot | |
| 11:25-12:00 | GSoC project: ode15{i,s} (Francesco Faccio) |
Open Slot | |
| 12:00-12:30 | Discussion | Discussion | |
12:30-14:00 |
Lunch | Lunch | Lunch |
| 14:00-14:35 | Open Slot (Pleanry session: CERN main auditorium) | Open Slot (Pleanry session: CERN main auditorium) | Visit to CERN sites |
| 14:35-15:10 | |||
| 15:10-15:45 | |||
| 15:45-16:00 | Coffee | Coffee | Coffee |
16:00-18:00 |
Code Sprint | Code Sprint | Organization of OctConf2018 |
| 18:00-19:00 | Fondue night (alternative 1) | Fondue night (alternative 2) | Closing and Farewell |
| 19:00-20:00 |
Poster Session
If you have a poster demonstrating how you use Octave to address an application in your field please add your name and poster topic to the list below. We will schedule an appropriately sized space based on the number of posters.
Confirmed Posters:
| Title | Author |
|---|---|
| Fast approximation of complicated simulators | JuanPi Carbajal |
Participants
To register officially, please use the CERN conference manager Indico.
- JuanPi Carbajal
- Francesco Faccio (need funding for travel)
- John W. Eaton (need funding for travel)
- Rik (need funding for travel)
- Douglas Stewart
- Kai T. Ohlhus
- Oliver Heimlich (probably only 2 days, waits for permission from wife)
- Carnë Draug (likely to attend but unsure. Will only be able to confirm the week before)