Jump to navigation
Jump to search
← Older edit
Newer edit →
Octave for GNU/Linux
7,846 bytes added
06:15, 30 July 2012
no edit summary
* Fedora 17, has Octave 3.6.2 as of June 28 2012
* openSUSE 11.4 and 12.1, has Octave 3.6.2 (Science repository) as of June 28 2012
More detailed instructions follow.
Determine what packages are currently available, using e.g.
$ aptitude search octave
As of 2008/05, the command above should list, amongst others:
octave3.0 - GNU Octave language for numerical computations (3.0 branch)
octave3.0-doc - PDF documentation on the GNU Octave language (3.0 branch)
octave3.0-emacsen - Emacs support for the GNU Octave language (3.0 branch)
octave3.0-headers - header files for the GNU Octave language (3.0 branch)
In July, 2012, with that time current stable (Squeeze), you get above mentioned in 3.2 version, so replace names of the packages appropriately in the following commands.
Select your choice of packages, then install them, e.g. w/
# aptitude install octave3.0 octave3.0-doc octave3.0-emacsen
*For brevity, the numerous other Debian packages have been omitted in the above list.
*At a minimum, one should install one of the packages returned by the command:
$ aptitude search ?provides\(^octave$\)
*The OctaveForge packages are spread over many Debian packages. All OctaveForge packages will probably be found with the command:
$ aptitude search ?description\(octave-forge\)
==[http://wiki.octave.org/wiki.pl?action=anchor&id=DebianDevelopmentSources#DebianDevelopmentSources Debian Development Sources]==
In order to build Octave from development sources, the first step is to follow the instructions given under the heading Development Sources of [http://www.gnu.org/software/octave/download.html Downloading Octave]. These commands require Mercurial, which can be installed with the command
# aptitude install mercurial
Building Octave from sources requires a number of programs and libraries. All of these are available as Debian packages and the list given on [Debian's source package page for Octave3.2] can be used for reference and installed by
# aptitude build-dep octave3.2
After this, it should be possible to follow the [[Build from source]] instructions.
Note that on Debian, multiple versions of Octave are provided concurrently and thus, Octave packages have names that include the version number, such as, for example: octave2.1-emacsen, octave3.0-emacsen, octave3.2-emacsen. This may change with Octave 3.4.
References: [https://mailman.cae.wisc.edu/pipermail/help-octave/2009-November/037394.html Upgrade Ubuntu Jaunty to Karmic (9.04 to 9.10) breaks self-compiled octave]([http://thread.gmane.org/gmane.comp.gnu.octave.general/27056/focus=27080 Gmane copy]), [http://lists.alioth.debian.org/pipermail/pkg-octave-devel/2011-February/007699.html Octave 3.4]
Note that on Ubuntu 10.04 and above, the default command to get packages is apt-get instead of aptitude (unless you have installed aptitude). Therefore the command to search the available packages is
$ apt-cache search octave
The rest of the commands are the same but replacing aptitude with apt-get.
To build newer releases of octave some extra packages may be needed. Next some extra compilation instructions are given.
If you plan to compile stuff in your Ubuntu system is not unwise to get the essential tools.
$ sudo apt-get install build-essential
After these you can proceed to get the dependencies as explained before.
$ sudo apt-get build-dep octave3.2
After this, it should be possible to follow the [[Build from source]] instructions. However, you may notice that the <code>configure</code> script says that '''bison''' and '''libfontconfig-dev''' are still missing so you need to get them too.
$ sudo apt-get install bison libfontconfig-dev
After this you can compile (which takes some time, 1:30 hr in a 2.0 Ghz PC). Even though make check may work perfectly, you may still find a problem when trying to plot. This is due to missing x11 for gnuplot. Gnuplot will tell you <code>Terminal set to unknown</code>. To fix it get the full gnuplot package
$ sudo apt-get install gnuplot
Make sure that gnuplot-x11 is in the list of installed packages.
You may still find a problem when plotting: <code>Gtk-WARNIN **: Unable to locate theme engine in module_path: "pixmap"</code> To fix this do
$ sudo apt-get install gtk2-engines-pixbuf
=== Unofficial binaries ===
Until Ubuntu packaging is up and running you can get .deb packages for Ubuntu built with [https://help.ubuntu.com/community/CheckInstall checkinstall] (note that these packages are not official)
'''Ubuntu 10.04 and 10.10'''
* [http://ubuntuone.com/6iTsUm8xqX7rXDf3S6yfeM Octave 3.4.3 (32bits)].
* [http://ubuntuone.com/4sGNUuh9ykZdadEX0QPtY2 Octave 3.4.3 (64bits)].
* [http://ubuntuone.com/6WX6polYRNXeJuBqVsCZvi Octave 3.6.1 (32bits)].
'''Ubuntu 11.04 and 11.10'''
* [http://ubuntuone.com/6l35Gf3j8alWL7fGeYW388 Octave 3.4.3 (32bits)].
* [http://ubuntuone.com/50BTtQn3qO3eMB8kngAMaq Octave 3.6.1 (64bits)].
* [https://launchpad.net/~picaso/+archive/octave Octave 3.6.1 ppa (32 & 64 bits)].
* [https://launchpad.net/~mvanderkolff/+archive/octave-3.6 Octave 3.6.1 ppa (w/ some forge pkgs)].
*[http://octave.1599824.n4.nabble.com/Octave-3-4-3-in-Ubuntu-11-10-td3947501.html Octave 3.4.3 in Ubuntu 11.10].
*[http://octave.1599824.n4.nabble.com/Ubuntu-10-10-binaries-to-test-td3929887.html Ubuntu 10.10 binaries to test].
*[http://octave.1599824.n4.nabble.com/Ubuntu-11-10-binaries-td3947804.html Ubuntu 11.10 binaries]
Early versions of Fedora included Octave in the core distribution. Since Fedora Core 3, Octave has been included in Fedora Extras (and is generally better maintained now in Extras than it was in Core). The packages can be installed using the yum command, which will automatically download and install the packages along with all of their dependencies.
The related packages are:
octave-forge is recommended to all users, as it provides many extra functions. octave-devel contains the octave headers and mkoctfile script and is really only needed by users who are developing code that is to be dynamically linked to octave. octave and octave-forge can be installed with the command
# yum install octave-forge
By default, yum will most likely install blas and lapack as your matrix math libraries, but ATLAS is usually much faster. If you want to install atlas with octave, use the command
# yum install octave-forge atlas
Note that if you are using an i386-compatible processor the base atlas package is not optimized for newer hardware. If you have newer hardware, you can get even better performance with the atlas-3dnow (AMD K6 processors), atlas-sse (Pentium III or newer), or atlas-sse2 (Pentium 4 or newer).
Octave is available through Gentoo's package management system, Portage. To install Octave:
# emerge sync
# emerge octave
# emerge octave-forge (optional)
Octave is included with RedHat. If you are still using an old version of RedHat and want a newer version of octave, your best options are to consider updating your distribution to a recent Fedora release or compile octave from source.
Note that RH 7.x distributions (as well as RedHat Enterprise Linux 2.1) have included an old version of GCC (pre 3.x). It is known that GCC 2.96 (included in RH7.3) can compile octave (as of version 2.1.57), but the resulting binary will be bad. RedHat made available RPMs for GCC 3.1-5 through http://rhn.redhat.com (those RPMs may be available on other RPM repositories).
Octave 2.1.36 is included with SuSE 8.1.
The ATLAS libraries are not included, for some reason, but the atlas.rpm for SuSE 7.3 (in the beo section) will install without problems.
Updated Octave's version is in the extra repository. It can be installed by typing:
# pacman -S octave
Retrieved from "
Not logged in