Changes

Jump to navigation Jump to search
{{Warning|This page is outdated (June 2020). For more recent information, see [[Octave for macOS]].}}
 
This prototype [http://www.macports.org/ MacPorts] portfile is intended to be used to produce a [[Create_a_MacOS_X_App_Bundle_Using_MacPorts|Octave App bundle for MacOS X]]. Before using it, please verify that the ''version'' number of Octave is correct. If a change is made to the file, it is recommended that the ''revision'' number be incremented to ensure that MacPorts recognizes that the port is outdated and in need of being upgraded.
This portfile deviates significantly from the Octave portfile provided by MacPorts. Specifically, this portfile has fltk-devel, epstool, pstoedit, and transfig as required dependencies. In addition, METIS has been removed, as it's license is not compatible with GPL. Since the <code>transfig</code> port ultimately includes <code>xord-libx11</code> which triggers an error during the <code>port mdmg</code> the <code>transfig</code> port has also been removed.
<nowiki># -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:et:sw=4:ts=4:sts=4
# $Id: Portfile 106065 2013-05-14 09:28:04Z ryandesign@macports.org $
PortSystem 1.0
name octave-local
version 3.76.0+4revision 43conflicts octave , octave-devel
categories math science
maintainers michaelld openmaintainer
license GPL-3
platforms darwin
 
description a Matlab-like environment for numerical analysis
long_description Octave provides a convenient command line interface \
homepage http://www.gnu.org/software/octave/
master_sites httpgnu://alpha.gnu.org/gnu/octave/
dist_subdir octave
distname octave-${version}
use_bzip2 yes
checksums md5 a9849cbead1c6f02a25a22a3142d1c1c \ sha1 1ee3fcdfcdcea91b4859191f8e4664ca7965943f rmd160 b0356f0c5d9366b8129d72ac58bbde837fee1a95 \ rmd160 sha256 2136309873c105bd9b06e01ed5726a4a281074f4fa185df9591f5d740f4d37ff6eaf06db576fdd3e0ddd9d0737365799e5d1c962
depends_build port:bison \
port:gperf \
port:grep \
port:gsed \
path:bin/perl:perl5 \
port:pkgconfig \
port:texinfo
port:fftw-3-single \
port:ftgl \
port:fltk-devel \
port:ghostscript \
port:glpk \
port:GraphicsMagick \
port:gnuplot \
port:gsed \
port:hdf5-18 \
port:less \
port:ncurses \
port:pcre \
port:readline \
port:qhull \
port:qrupdate \
port:readline \
port:SuiteSparse
depends_run port:epstool \
port:transfig \
port:pstoedit
 
# allow us to disable checking for FLTK
# via the environment variable "FLTK_CONFIG"
patchfiles-append patch-configure.diff
universal_variant no
# do not octave requires a fortran compiler, so require the use CLANG of one of the# MacPorts GCC ports (yetfor now). compiler.blacklist gcc-3.3 gcc-4.0 gcc-4.2 llvm-gcc-4.2 \ apple-gcc-4.0 apple-gcc-4.2 clang macports-clang-2.9 \if {${configure macports-clang-3.0 macports-clang-3.compiler} == "1 macports-clang"} { -3.2 \ configuremacports-clang-3.compiler 3 macports-llvm-gcc-4.2}
configure.args --disable-dependency-tracking \
--without-x \
--disable-docs \
--with-cholmod="-lcholmod" \ --with-umfpack="-lumfpack -lSuiteSparse"
# octave uses a number of other ports to create sources from template:
configure.awk ${prefix}/bin/gawk
configure.env-append GREP="${prefix}/bin/grep" \
FLTK_CONFIG=no \
SED="${prefix}/bin/gsed" \
TEXI2DVI="${prefix}/bin/texi2dvi" \
TEXI2PDF="${prefix}/bin/texi2pdf" \ APPLE_CXX="/usr/bin/g++"
configure.cppflags
configure.ldflags
 
pre-build {
reinplace "/'display\.cc'/s@\$(CXX)@\$(APPLE_CXX)@g" \
${worksrcpath}/src/Makefile
}
 
build.env-append APPLE_CXX="/usr/bin/g++"
test.run yes
test.target check
variant gcc43 description platform darwin 11 { # 10.7 requires an extra patch; this patch will break the build with the macports gcc43 toolchainon # 10.6 and prior, so apply it only under 10.7. patchfiles-append patch-src-display.cc.diff} conflicts gcc46 gcc45 gcc44 g95  platform darwin 12 { # In 10.8 patch is required as above, also # the LANG environment variable needs to # be set to "C" otherwise /usr/bin/sed # fails with an error, if you installed gsed # with default name this should have no effect.  patchfiles-append patch-src-display.cc.diff build.args-append LANG="C"
variant gcc44 gcc43 description {build with the macports gcc44 gcc43 toolchain} conflicts gcc48 gcc47 gcc46 gcc45 gcc43 gcc44 g95 {}
variant gcc45 gcc44 description {build with the macports gcc45 gcc44 toolchain} conflicts gcc48 gcc47 gcc46 gcc44 gcc45 gcc43 g95 {}
variant gcc46 gcc45 description {build with the macports gcc45 toolchain} conflicts gcc45 gcc48 gcc47 gcc46 gcc44 gcc43 g95 {}
variant gcc46 description {build with the macports gcc46 toolchain} conflicts gcc48 gcc47 gcc45 gcc44 gcc43 g95 {} variant gcc47 description {build with the macports gcc47 toolchain} conflicts gcc48 gcc46 gcc45 gcc44 gcc43 g95{} variant gcc48 description {build with the macports gcc48 toolchain} conflicts gcc47 gcc46 gcc45 gcc44 gcc43 g95 {} variant g95 description {build with g95} conflicts gcc48 gcc47 gcc46 gcc45 gcc44 gcc45 gcc46 gcc43 {
depends_build-append port:g95
configure.f77 "${prefix}/bin/g95"
# default found in the 'atlas' port (but, this is not checked for).
# check for setting the default variant (gcc44gcc47) if { ![variant_isset gcc43] && ![variant_isset gcc44] && \
![variant_isset gcc45] && ![variant_isset gcc46] && \
![variant_isset gcc47] && ![variant_isset gcc48] && \
![variant_isset g95] } {
default_variants +gcc44gcc47
}
# check if the user disabled just the default variant: -gcc44gcc47 if { ![variant_isset gcc43] && ![variant_isset gcc44] && \
![variant_isset gcc45] && ![variant_isset gcc46] && \
![variant_isset gcc47] && ![variant_isset gcc48] && \
![variant_isset g95] } {
pre-fetch { error "You cannot use must select one of the variant -gcc44 alonecompiler variants." }
}
} elseif {[variant_isset gcc46]} {
set gcc_version "4.6"
} elseif {[variant_isset gcc47]} {
set gcc_version "4.7"
} elseif {[variant_isset gcc48]} {
set gcc_version "4.8"
}
if {${gcc_version} != ""} {
set gcc_version_join [join [split ${gcc_version} "."] ""]
configure.ldflags "-L${prefix}/lib/gcc${gcc_version_join}/libstdc" configure.ldflags-append -lstdc++.6.dylib"\ -lgfortran
depends_build-append port:gcc${gcc_version_join}
configure.compiler macports-gcc-${gcc_version}
variant docs description {Enable creation and installation of documentation} {
depends_run-append port:texlive-basic
# latex needed for lcircle10 font etc.
depends_build-append port:texlive-latex
configure.args-replace s|--disable-docs|--enable-docs|
}
configure.args-replace s|--without-x|--with-x|
configure.args-append --x-includes=${prefix}
}
 
variant fltk description {Include FLTK for graphical front-end} {
depends_lib-append path:lib/libfltk.dylib:fltk
configure.env-delete FLTK_CONFIG=no
}
livecheck.type regex
livecheck.url http://www.gnu.org/software/octave/news.html
livecheck.regex Version (\\d+(\\.\\d+)*) </nowiki> [[Category:Outdated pages]]

Navigation menu