Windows Installer: Difference between revisions

From Octave
Jump to navigation Jump to search
(→‎Steps to create Windows Installer: move extra make targets to the tweaks section, minor markup cleanup)
 
(62 intermediate revisions by 17 users not shown)
Line 1: Line 1:
:''This article is about how to make the Windows installer; if you'd like just to use the installer, see [[Octave for Microsoft Windows]].''
:''This article is about how to make the Microsoft Windows installer; if you'd like just to use the installer, see [[Octave for Microsoft Windows]].''
GNU Octave is primarily developed on GNU/Linux and other POSIX conformal systems. There have been many efforts in the past to build ports of GNU Octave for Windows. Take a look at the various ports of Octave available for Windows [http://wiki.octave.org/Octave_for_Windows here].
GNU Octave is primarily developed on GNU/Linux and other POSIX compliant systems. There have been many efforts in the past to build ports of GNU Octave for Microsoft Windows.
This page contains instructions about creating a MS Windows installer using [[MXE|mxe-octave]] (a fork of [http://mxe.cc/ MXE]).
This means, '''the MS Windows installer is [https://en.wikipedia.org/wiki/Cross_compiler cross-compiled] using a GNU/Linux system'''.


Recently some work has been done in maintaining a unified build system [http://wiki.octave.org/MXE '''mxe-octave'''] (a fork of [http://mxe.cc/ MXE]) which anyone can use to produce cross as well as native builds of GNU Octave for Windows and Mac OS X platforms. This page contains instructions about creating a Windows installer using mxe-octave.
==Creating the MS Windows Installer==


==Steps to create Windows Installer==
===General steps===
 
# Reassure you have the package libffi-dev installed or the Python build will silently be incomplete
# [http://wiki.octave.org/Windows_Installer#Installing_requirements_of_MXE_Octave Install all requirements of MXE Octave].
# Install the MXE build requirements.<ref>The requirements for each system are listed in the repository https://hg.octave.org/mxe-octave/file/tip/index.html.  Start with the second step to read the {{Path|index.html}} file on your local machine.</ref>
# <code>hg clone http://hg.octave.org/mxe-octave/</code>
# <code>hg clone https://hg.octave.org/mxe-octave</code><ref>Use <code>hg clone https://hg.octave.org/mxe-octave <name of mxe-octave build dir></code> to choose another directory.</ref>
# <code>cd mxe-octave</code>
# <code>cd mxe-octave</code>
# Make sure MXE version of all compiler tools are found first in path
# <code>./bootstrap</code> (Among other things, the <code>bootstrap</code> script creates the <code>configure</code> script for the next step.)
## <code>PATH=`pwd`/usr/bin:$PATH</code>         # for Bourne shell
## <code>setenv PATH `pwd`/usr/bin:$PATH</code>   # for C shell
# <code>autoconf</code>
# <code>./configure</code>
# <code>./configure</code>
# <code>make nsis-installer</code>
# <code>make all nsis-installer</code>
 
===Tweaks===


* Use <code>make tar-dist</code> or <code>make zip-dist</code> instead of <code>nsis-installer</code> if you want to build just an archive of the files to install on Windows instead of an installer wizard.
===Step details===
* Use <code>make JOBS=4</code> if you have a multicore system to enable parallel build. '''Do not''' use <code>make -j4</code>.
* Use <code>./configure --disable-strip-dist-files</code> if you want to keep debug symbols in the installed binaries for debugging on Windows.
* Include gdb in the installer by running <code>make gdb</code> before making the <code>nsis-installer</code> target.


==Installing requirements of MXE Octave==
====<code>./configure</code>====
MXE Octave requires a recent Unix system where all components as stated below are installed.


===Debian (GNU/kFreeBSD & GNU/Linux)===
The current Microsoft Windows installers are build in three "flavors": for common 64- and 32-bit systems ('''"w64"''' and '''"w32"''') and for 64-bit systems exceeding 32 GB of main memory to store large data structures ('''"w64-64"''').
aptitude install -R autoconf automake bash bison bzip2 \
                    cmake flex gettext git g++ intltool \
                    libffi-dev libtool libltdl-dev \
                    mercurial mingw32 openssl libssl-dev \
                    libxml-parser-perl make patch perl \
                    pkg-config scons sed unzip wget \
                    xz-utils yasm


On 64-bit Debian, install also:
{| class="wikitable"
! "w64" (recommended)
! "w64-64"
! "w32"
|-style="vertical-align:top;"
| <pre style="min-width:330px;">
./configure                        \
  --enable-devel-tools            \
  --enable-binary-packages        \
  --with-ccache                    \
  --enable-octave=<octave version>
</pre>
| <pre style="min-width:330px;">
./configure                        \
  --enable-devel-tools            \
  --enable-binary-packages        \
  --with-ccache                    \
  --enable-octave=<octave version> \
  --enable-fortran-int64
</pre>
| <pre style="min-width:330px;">
./configure                        \
  --enable-devel-tools            \
  --enable-binary-packages        \
  --with-ccache                    \
  --enable-octave=<octave version> \
  --disable-windows-64
</pre>
|}


aptitude install -R g++-multilib libc6-dev-i386
The individual options have the following meaning (see also <code>./configure --help</code>):


If you are using Ubuntu, then you can do <code>apt-get install foo</code> instead of <code>aptitude install -R foo</code>.
* <code>--enable-devel-tools</code>: Include gdb and an MSYS shell in the binary.
** If you seriously want to work with gdb, you need <code>--disable-strip-dist-files</code> as configure option to keep debug symbols in the installed binaries for debugging on MS Windows. Beware as the total Octave distribution will be > 2 GB, the max. size for an NSIS installer. Your only options are to make 7z-dist, zip-dist or tar-dist installers.
* <code>--enable-binary-packages</code>: Cross-compile binary modules in [[Octave Forge]] packages. This saves time when installing them once the installation runs on Microsoft Windows. Furthermore, some packages require patches to cross-compile successfully (or with current Octave versions). Those additional patches would be missing when compiling the original packages from Octave Forge on Windows later on. Some Octave Forge packages require a working Octave during compilation. Therefore, the correct version(!) of Octave must be installed on the host system.
* <code>--with-ccache</code>: The usage of [https://ccache.dev/ ccache] may speed up repetitive compilation drastically.
* <code>--enable-octave=<octave version></code>: Build a specific version of GNU Octave, which can be one of:
** <code>release</code> use {{Path|src/release-octave.mk}}, download and build the latest GNU Octave release.
** <code>stable</code> or <code>default</code> uses {{Path|src/stable-octave.mk}} or {{Path|src/default-octave.mk}}, respectively. This builds from a self-created distribution tarball from the "stable" or "default" development branch of GNU Octave.  See [[#Build installers for Octave development versions|below]] for details.
* <code>--disable-windows-64</code>: Build for 32-bit MS Windows.
* <code>--enable-fortran-int64</code>: Use 64-bit integers in Fortran code and especially in numerical library code.  This option only affects the size of integers used in Fortran code like the BLAS and LAPACK libraries.  On 64-bit systems, Octave always uses 64-bit integers for indexing and basic array operations.  See [[Enable large arrays: Build octave such that it can use arrays larger than 2Gb.|Enable large arrays]] for details.
* <code>--disable-system-opengl</code>: Include software OpenGL libraries. This might help when working with buggy graphics card drivers, but might be slower than hardware accelerated rendering.
* <code>--with-pkg-dir=../mxe-octave-pkg</code>: If you are working with several build trees, you can share a common package directory.


On a fesh Linux Mint 16 x86_64, in addition to the above also install:
====<code>make</code>====


sudo apt-get install libc6-dev-i386 gcc-multilib libgmp3-dev libmpfr4 libmpfr-dev
* Use <code>make all 7z-dist</code>, <code>make all tar-dist</code> or <code>make all zip-dist</code> instead of <code>make all nsis-installer</code> if you want to build just an archive of the files to install on MS Windows instead of an installer wizard.
  sudo apt-get build-dep gcc-4.8
* By default, packages will be built one at a time '''without parallelization'''. You may use <code>make JOBS=4</code> (choose a number other than 4 that is appropriate for your system) to build each individual package in parallel.
** '''Avoid using the <code>-j</code> option for <code>make</code>:''' Using <code>-j</code> enables building packages in parallel, which can mess up the mxe build system.  Use this option with care! Another pitfall is the example <code>make -j4 JOBS=4</code>, which can result in as many as 16 jobs running at once.
* Include gdb in the installer by running <code>make gdb</code> before making the <code>nsis-installer</code> target.


If not installed you will get error messages like  "/usr/include/stdc-predef.h:30:26: fatal error: bits/predefs.h: No such file or directory" or "/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.8/libgcc.a when searching for -lgcc" when compiling ocaml-core.
===Build installers for Octave development versions===
The packages libgmp3-dev libmpfr4 libmpfr-dev libmpc-dev are needed for compiling the build-gcc.


===Fedora===
# Build the "stable" or "default" Octave development branch on Linux (in separate source and build trees) including your favorite modifications and patches.  Octave must be configured with Java support. How to do this depends on your Linux distribution, see [[Building]].
  yum install autoconf automake bash bison bzip2 cmake \
# Verify that Octave runs fine in Linux (for example using <code>make check</code> and by trying to run your build <code>./run-octave --gui</code>).
            flex gcc-c++ gettext git intltool make sed \
# Create a distribution archive called '''"octave-<version>.tar.lz"''' in the top build directory with <code>make dist-lzip DIST_IGNORE_HG_STATE=1</code>. <code>lzip</code> needs to be available for this step. (On Debian-like systems, it can be installed with <code>apt-get install lzip</code>).
            libffi-devel libtool openssl-devel patch perl pkgconfig \
# Move or copy '''"octave-<version>.tar.lz"''' to the {{Path|<mxe-octave build>/pkg}} folder (or create a symbolic link to it).
            scons yasm unzip wget xz
# Follow the [[#General steps|general steps]] and ensure the configuration with either of <code>--enable-octave=stable</code> or <code>--enable-octave=default</code>.
On 64-bit Fedora, there are [http://wiki.octave.org/Windows_Installer#Open_Issues_with_NSIS open issues with the NSIS] package.  
# Move the final installer in {{Path|<mxe-octave build>/dist}} to some Microsoft Windows machine (USB thumb drive, LAN copy, whatever) and install it "as usual". If you created an archive, using <code>make all 7z-dist</code> for example, you'll have to manually create the desktop and start menu shortcuts (for GNU Octave and the MSYS-shell).


===FreeBSD===
For next builds, mxe-octave is already configured and all dependencies have been built so the only thing to do is to create a new '''"octave-<version>.tar.lz"''' and repeating the steps above.  This should be much faster than the first run.  If the new '''"octave-<version>.tar.lz"''' is not build and ignored, try the following:
pkg_add -r automake111 autoconf268 bash bison cmake \
            flex gettext git gmake gsed intltool libffi libtool \
            openssl patch perl p5-XML-Parser pkg-config \
            scons unzip wget yasm


Ensure that /usr/local/bin precedes /usr/bin in your $PATH:<br>
  touch src/default-octave.mk
For C style shells, edit .cshrc
  setenv PATH /usr/local/bin:$PATH
For Bourne shells, edit .profile
export PATH = /usr/local/bin:$PATH


On 64-bit FreeBSD, there are [http://wiki.octave.org/Windows_Installer#Open_Issues_with_NSIS open issues with the NSIS] package.
If you've renamed '''"octave-<version>.tar.lz"''', be sure it matches with the package name in {{Path|src/default-octave.mk}}.


===Frugalware===
===Remarks===
pacman-g2 -S autoconf automake bash bzip2 bison cmake \
              flex gcc gettext git intltool make sed libffi libtool \
              openssl patch perl perl-xml-parser pkgconfig \
              scons unzip wget xz xz-lzma yasm
On 64-bit Frugalware, there are [http://wiki.octave.org/Windows_Installer#Open_Issues_with_NSIS open issues with the NSIS] package.


===Gentoo===
* If you have several MXE-Octave build dirs (for e.g., stable and several development versions, or build trees for 32bit and 64bit Windows targets), it is possible to point to a common {{Path|pkg}} directory using the configure flag <code>--with-pkg-dir=path_to_common_pkg_directory</code>. That way downloading the packages for each build tree can be avoided. Thus, potentially saving a lot of downloading bandwidth.
emerge sys-devel/autoconf sys-devel/automake \
* As of late December 2015, [https://hg.octave.org/mxe-octave/rev/0962acdde3be MXE-Octave allows out-of-tree builds]. This makes it easier to build separate Octave versions with the same MXE-Octave tree.
        app-shells/bash sys-devel/bison app-arch/bzip2 \
* To keep MXE-Octave up-to-date, from time to time run the following commands in the MXE-Octave repository:
        dev-util/cmake sys-devel/flex sys-devel/gcc \
hg -v pull
        sys-devel/gettext dev-vcs/git \
hg -v update
        dev-util/intltool sys-devel/make sys-apps/sed \
* However, some package updates might need a clean build tree. If an incremental build fails after an update, consider running <code>make clean</code> or starting with a fresh clone, see [[#General steps|General steps]].
        dev-libs/libffi sys-devel/libtool dev-libs/openssl sys-devel/patch \
* In the mean time, you might want to regularly clean up {{Path|<mxe-octave build dir>/log}} to save disk space. The logs are of informational value only and are not needed after the build completes. They can safely be deleted.
        dev-lang/perl dev-perl/XML-Parser \
* It can happen that you meet problems with Java. To build Octave with Java support built-in, MXE-Octave needs:
        dev-util/pkgconfig dev-util/scons app-arch/unzip \
** A Java JDK (Java Development Kit) on the '''build''' system. In other words, the javac (Java compiler) and jar (Java archiver) executables should be in the PATH-system-variable.
        net-misc/wget app-arch/xz-utils dev-lang/yasm
** Java include files for MS Windows. They should reside in {{Path|<mxe-octave build dir>/usr/x86_64-w64-mingw32/include/java/win32}} or {{Path|<mxe-octave build dir>/usr/i686-w64-mingw32/include/java/win32}}, respectively. If they are not present, MXE-Octave downloads them automatically. However, this might fail occasionally (e.g. if the server cannot be reached). On a multi-boot system, a solution (note: dirty hack warning!) is symlinking to the MS Windows include files on the MS Windows partition from the MXE-Octave location. (Don't do this unless you are sure what you are doing.)


===Mac OS X===
===Troubleshooting===
Install [http://developer.apple.com/xcode/ Xcode 4] and [http://www.macports.org/ MacPorts], then run:


  sudo port install autoconf automake bison cmake flex \
* The error message displayed by <code>make</code> is simply the last lines of the log file. This may truncate the actual error message.  Find the full error messages in the {{Path|<mxe-octave build>/log}} directory.
                  gettext git-core gsed intltool libffi libtool \
* Sometimes running <code>make</code> a second time without changing anything will fix the problem.  In particular, <code>autotools</code> rebuilds some files in the first call <code>make</code>, which may cause the second call of <code>make</code> to succeed.
                  openssl p5-xml-parser pkgconfig scons \
* If it is building Octave that failed, the source will be left in {{Path|<mxe-octave build>/tmp-default-octave}} and it is possible to run "configure && make" in that directory.
                  wget xz yasm
* The configuration will be for the target system, not your own.  In particular, if you have not installed all of the packages that mxe-octave installs, then your configuration will be different.  However, some configuration variables will differ even if you have the same packages, and some compiler features may be available on the host system that are not available in cross-compile mode.
* A possible causes for build failure is having files in your local source or build directory that are not listed in the {{Path|module.mk}} files; these are not copied into the dist archive.
* Sometimes mxe-octave builds fail at "libmng".  This may be due to a race condition related to disk I/O when using a fast SSD harddisk. A way to get past this is by specifying "make nsis-installer JOBS=1", if required repeatedly (sometimes 5 or 6 times), interrupting the build in the next step/dependency once "libmng" has been built fine, and restarting with "make nsis-installer JOBS=<higher number>". As of December 2015 it is only libmng that has this issue.


Mac OS X versions ≤ 10.6 are no longer supported.
==Testing using virtual machines==


===MingW===
Microsoft provides several virtual machine (e.g. VirtualBox) disk images of MS Windows for about one month of testing
Make sure to update and upgrade packages as some of the default versions of packages are too old to work correctly.
* https://developer.microsoft.com/en-us/windows/downloads/virtual-machines
mingw-get update
* https://developer.microsoft.com/en-us/microsoft-edge/tools/vms (primarily meant for testing the MS-Edge browser)
mingw-get upgrade
The license (given on that page) for these images does not limit the use of these images. So it is perfectly possible to also test GNU Octave.


And then get required packages.
The key idea is to create a shared folder inside the virtual machine to the mxe-octave build directory. It is advised to make it read-only.  Either install (or unpack) Octave into MS Windows 10, or create a shortcut to {{Path|octave.vbs}} in the {{Path|<mxe-octave build dir>/dist/octave}} subdirectory on the Linux side.
mingw-get install autoconf bash msys-bison msys-flex gcc gcc-c++ \
                  gcc-fortran gettext msys-m4 msys-make msys-sed \
                  libiconv msys-openssl msys-patch msys-perl \
                  msys-libarchive msys-unzip msys-wget msys-bsdtar
   
You will also need to install Windows versions of Python and Ghostscript and ensure they are in visible in the PATH.


===OpenSUSE===
Some advantages:
zypper install -R autoconf automake bash bison bzip2 \
* No dedicated MS Windows machine or rebooting from Linux is needed;
                  cmake flex gcc-c++ gettext-tools git \
* The <strike>latest</strike> MS Windows 10 version is always available;
                  intltool libffi-devel libtool make openssl \
* Building the installer archives (zip, 7z, ...) isn't needed. One can interrupt the build process after the local installation of Octave has been made in the dist/octave subdirectory of mxe-octave, i.e., when the message "generating installer" (or "zip...") is shown. This saves about 10-15 minutes. Of course one can also use the common distribution formats for the virtual MS Windows machine.
                  libopenssl-devel patch perl \
                  perl-XML-Parser pkg-config scons \
                  sed unzip wget xz yasm


On 64-bit openSUSE, install also:
Hints:
zypper install -R gcc-32bit glibc-devel-32bit \
* It is possible to adapt {{Path|mxe-octave/binary-dist-rules.mk}} to have a consistent name for the {{Path|<mxe-octave build dir>/dist/octave}} subdirectory (i.e., without time/date/bitwidth suffixes). This way, in MS Windows the shortcut doesn't need adaptation after each cross-build action. Maybe it would be better if {{Path|mxe-octave/binary-dist-rules.mk}} had a rule to create a symlink {{Path|<mxe-octave build dir>/dist/octave}} pointing to the latest cross-build.
                  libgcc46-32bit libgomp46-32bit \
* The image expires after 30 days. But if you make a VirtualBox snapshot before starting the VM the first time, you can revert to that snapshot (essentially, the image will last longer). This way, you also won't need to uninstall Octave each time before installing a new build.
                  libstdc++46-devel-32bit


==Open Issues with NSIS==
==Footnotes==
The NSIS package contains some native tools that are currently 32-bit only. In order to build these on a 64-bit system, multi-lib support must be enabled in the compiler toolchain. However, not all operating systems support this. Since no other packages depend on it, the remainder of MXE can be successfully built by simply specifying an empty build rule:
make nsis_BUILD=


==Creating an NSIS based installer==
<references/>
The <code>make nsis-installer</code> command produces a basic NSIS installer that is ready to be distributed. You can however create
a newer and better installer by getting a newer version of mxe-octave/makeinst-script.sh [http://inversethought.com/hg/mxe-octave-anirudha/raw-file/9d6566d9944e/makeinst-script.sh here]. The script included hasn't been merged with main mxe-octave yet.
(Note Nov 10 2013: this makeinst-script.sh doesn't work with the main mxe-octave repo; it errors out with "glibc detected" and gives up.)


[[Category:Packaging]]
[[Category:Building]]
[[Category:Microsoft Windows]]

Latest revision as of 17:50, 19 April 2023

This article is about how to make the Microsoft Windows installer; if you'd like just to use the installer, see Octave for Microsoft Windows.

GNU Octave is primarily developed on GNU/Linux and other POSIX compliant systems. There have been many efforts in the past to build ports of GNU Octave for Microsoft Windows. This page contains instructions about creating a MS Windows installer using mxe-octave (a fork of MXE). This means, the MS Windows installer is cross-compiled using a GNU/Linux system.

Creating the MS Windows Installer[edit]

General steps[edit]

  1. Reassure you have the package libffi-dev installed or the Python build will silently be incomplete
  2. Install the MXE build requirements.[1]
  3. hg clone https://hg.octave.org/mxe-octave[2]
  4. cd mxe-octave
  5. ./bootstrap (Among other things, the bootstrap script creates the configure script for the next step.)
  6. ./configure
  7. make all nsis-installer

Step details[edit]

./configure[edit]

The current Microsoft Windows installers are build in three "flavors": for common 64- and 32-bit systems ("w64" and "w32") and for 64-bit systems exceeding 32 GB of main memory to store large data structures ("w64-64").

"w64" (recommended) "w64-64" "w32"
./configure                        \
  --enable-devel-tools             \
  --enable-binary-packages         \
  --with-ccache                    \
  --enable-octave=<octave version>
./configure                        \
  --enable-devel-tools             \
  --enable-binary-packages         \
  --with-ccache                    \
  --enable-octave=<octave version> \
  --enable-fortran-int64
./configure                        \
  --enable-devel-tools             \
  --enable-binary-packages         \
  --with-ccache                    \
  --enable-octave=<octave version> \
  --disable-windows-64

The individual options have the following meaning (see also ./configure --help):

  • --enable-devel-tools: Include gdb and an MSYS shell in the binary.
    • If you seriously want to work with gdb, you need --disable-strip-dist-files as configure option to keep debug symbols in the installed binaries for debugging on MS Windows. Beware as the total Octave distribution will be > 2 GB, the max. size for an NSIS installer. Your only options are to make 7z-dist, zip-dist or tar-dist installers.
  • --enable-binary-packages: Cross-compile binary modules in Octave Forge packages. This saves time when installing them once the installation runs on Microsoft Windows. Furthermore, some packages require patches to cross-compile successfully (or with current Octave versions). Those additional patches would be missing when compiling the original packages from Octave Forge on Windows later on. Some Octave Forge packages require a working Octave during compilation. Therefore, the correct version(!) of Octave must be installed on the host system.
  • --with-ccache: The usage of ccache may speed up repetitive compilation drastically.
  • --enable-octave=<octave version>: Build a specific version of GNU Octave, which can be one of:
    • release use src/release-octave.mk, download and build the latest GNU Octave release.
    • stable or default uses src/stable-octave.mk or src/default-octave.mk, respectively. This builds from a self-created distribution tarball from the "stable" or "default" development branch of GNU Octave. See below for details.
  • --disable-windows-64: Build for 32-bit MS Windows.
  • --enable-fortran-int64: Use 64-bit integers in Fortran code and especially in numerical library code. This option only affects the size of integers used in Fortran code like the BLAS and LAPACK libraries. On 64-bit systems, Octave always uses 64-bit integers for indexing and basic array operations. See Enable large arrays for details.
  • --disable-system-opengl: Include software OpenGL libraries. This might help when working with buggy graphics card drivers, but might be slower than hardware accelerated rendering.
  • --with-pkg-dir=../mxe-octave-pkg: If you are working with several build trees, you can share a common package directory.

make[edit]

  • Use make all 7z-dist, make all tar-dist or make all zip-dist instead of make all nsis-installer if you want to build just an archive of the files to install on MS Windows instead of an installer wizard.
  • By default, packages will be built one at a time without parallelization. You may use make JOBS=4 (choose a number other than 4 that is appropriate for your system) to build each individual package in parallel.
    • Avoid using the -j option for make: Using -j enables building packages in parallel, which can mess up the mxe build system. Use this option with care! Another pitfall is the example make -j4 JOBS=4, which can result in as many as 16 jobs running at once.
  • Include gdb in the installer by running make gdb before making the nsis-installer target.

Build installers for Octave development versions[edit]

  1. Build the "stable" or "default" Octave development branch on Linux (in separate source and build trees) including your favorite modifications and patches. Octave must be configured with Java support. How to do this depends on your Linux distribution, see Building.
  2. Verify that Octave runs fine in Linux (for example using make check and by trying to run your build ./run-octave --gui).
  3. Create a distribution archive called "octave-<version>.tar.lz" in the top build directory with make dist-lzip DIST_IGNORE_HG_STATE=1. lzip needs to be available for this step. (On Debian-like systems, it can be installed with apt-get install lzip).
  4. Move or copy "octave-<version>.tar.lz" to the <mxe-octave build>/pkg folder (or create a symbolic link to it).
  5. Follow the general steps and ensure the configuration with either of --enable-octave=stable or --enable-octave=default.
  6. Move the final installer in <mxe-octave build>/dist to some Microsoft Windows machine (USB thumb drive, LAN copy, whatever) and install it "as usual". If you created an archive, using make all 7z-dist for example, you'll have to manually create the desktop and start menu shortcuts (for GNU Octave and the MSYS-shell).

For next builds, mxe-octave is already configured and all dependencies have been built so the only thing to do is to create a new "octave-<version>.tar.lz" and repeating the steps above. This should be much faster than the first run. If the new "octave-<version>.tar.lz" is not build and ignored, try the following:

touch src/default-octave.mk

If you've renamed "octave-<version>.tar.lz", be sure it matches with the package name in src/default-octave.mk.

Remarks[edit]

  • If you have several MXE-Octave build dirs (for e.g., stable and several development versions, or build trees for 32bit and 64bit Windows targets), it is possible to point to a common pkg directory using the configure flag --with-pkg-dir=path_to_common_pkg_directory. That way downloading the packages for each build tree can be avoided. Thus, potentially saving a lot of downloading bandwidth.
  • As of late December 2015, MXE-Octave allows out-of-tree builds. This makes it easier to build separate Octave versions with the same MXE-Octave tree.
  • To keep MXE-Octave up-to-date, from time to time run the following commands in the MXE-Octave repository:
hg -v pull
hg -v update
  • However, some package updates might need a clean build tree. If an incremental build fails after an update, consider running make clean or starting with a fresh clone, see General steps.
  • In the mean time, you might want to regularly clean up <mxe-octave build dir>/log to save disk space. The logs are of informational value only and are not needed after the build completes. They can safely be deleted.
  • It can happen that you meet problems with Java. To build Octave with Java support built-in, MXE-Octave needs:
    • A Java JDK (Java Development Kit) on the build system. In other words, the javac (Java compiler) and jar (Java archiver) executables should be in the PATH-system-variable.
    • Java include files for MS Windows. They should reside in <mxe-octave build dir>/usr/x86_64-w64-mingw32/include/java/win32 or <mxe-octave build dir>/usr/i686-w64-mingw32/include/java/win32, respectively. If they are not present, MXE-Octave downloads them automatically. However, this might fail occasionally (e.g. if the server cannot be reached). On a multi-boot system, a solution (note: dirty hack warning!) is symlinking to the MS Windows include files on the MS Windows partition from the MXE-Octave location. (Don't do this unless you are sure what you are doing.)

Troubleshooting[edit]

  • The error message displayed by make is simply the last lines of the log file. This may truncate the actual error message. Find the full error messages in the <mxe-octave build>/log directory.
  • Sometimes running make a second time without changing anything will fix the problem. In particular, autotools rebuilds some files in the first call make, which may cause the second call of make to succeed.
  • If it is building Octave that failed, the source will be left in <mxe-octave build>/tmp-default-octave and it is possible to run "configure && make" in that directory.
  • The configuration will be for the target system, not your own. In particular, if you have not installed all of the packages that mxe-octave installs, then your configuration will be different. However, some configuration variables will differ even if you have the same packages, and some compiler features may be available on the host system that are not available in cross-compile mode.
  • A possible causes for build failure is having files in your local source or build directory that are not listed in the module.mk files; these are not copied into the dist archive.
  • Sometimes mxe-octave builds fail at "libmng". This may be due to a race condition related to disk I/O when using a fast SSD harddisk. A way to get past this is by specifying "make nsis-installer JOBS=1", if required repeatedly (sometimes 5 or 6 times), interrupting the build in the next step/dependency once "libmng" has been built fine, and restarting with "make nsis-installer JOBS=<higher number>". As of December 2015 it is only libmng that has this issue.

Testing using virtual machines[edit]

Microsoft provides several virtual machine (e.g. VirtualBox) disk images of MS Windows for about one month of testing

The license (given on that page) for these images does not limit the use of these images. So it is perfectly possible to also test GNU Octave.

The key idea is to create a shared folder inside the virtual machine to the mxe-octave build directory. It is advised to make it read-only. Either install (or unpack) Octave into MS Windows 10, or create a shortcut to octave.vbs in the <mxe-octave build dir>/dist/octave subdirectory on the Linux side.

Some advantages:

  • No dedicated MS Windows machine or rebooting from Linux is needed;
  • The latest MS Windows 10 version is always available;
  • Building the installer archives (zip, 7z, ...) isn't needed. One can interrupt the build process after the local installation of Octave has been made in the dist/octave subdirectory of mxe-octave, i.e., when the message "generating installer" (or "zip...") is shown. This saves about 10-15 minutes. Of course one can also use the common distribution formats for the virtual MS Windows machine.

Hints:

  • It is possible to adapt mxe-octave/binary-dist-rules.mk to have a consistent name for the <mxe-octave build dir>/dist/octave subdirectory (i.e., without time/date/bitwidth suffixes). This way, in MS Windows the shortcut doesn't need adaptation after each cross-build action. Maybe it would be better if mxe-octave/binary-dist-rules.mk had a rule to create a symlink <mxe-octave build dir>/dist/octave pointing to the latest cross-build.
  • The image expires after 30 days. But if you make a VirtualBox snapshot before starting the VM the first time, you can revert to that snapshot (essentially, the image will last longer). This way, you also won't need to uninstall Octave each time before installing a new build.

Footnotes[edit]

  1. The requirements for each system are listed in the repository https://hg.octave.org/mxe-octave/file/tip/index.html. Start with the second step to read the index.html file on your local machine.
  2. Use hg clone https://hg.octave.org/mxe-octave <name of mxe-octave build dir> to choose another directory.