Octave for macOS: Difference between revisions

From Octave
Jump to navigation Jump to search
No edit summary
No edit summary
Line 76: Line 76:
Copy [https://raw.github.com/Homebrew/homebrew-science/master/hdf5.rb hdf5.rb] into /usr/local/Library/Formula. Then run <pre> brew install hdf5 </pre>
Copy [https://raw.github.com/Homebrew/homebrew-science/master/hdf5.rb hdf5.rb] into /usr/local/Library/Formula. Then run <pre> brew install hdf5 </pre>
Currently as of Nov 13, 2013 you also have to adjust the hdf5 version number to hdf5-1.8.12.tar.bz2 and remove the checksum line below.
Currently as of Nov 13, 2013 you also have to adjust the hdf5 version number to hdf5-1.8.12.tar.bz2 and remove the checksum line below.
Should the fltk download fail, you can download http://fltk.org/pub/fltk/1.3.2/fltk-1.3.2-source.tar.gz to /Library/Caches/Homebrew/fltk-1.3.2.tar.gz and resume with brew install octave.
Should the fltk download fail, you can download http://fltk.org/pub/fltk/1.3.2/fltk-1.3.2-source.tar.gz to /Library/Caches/Homebrew/fltk-1.3.2.tar.gz and resume with brew install octave. If you happen to run into trouble in the last step, building octave, because your autotools are outdated, you can brew install them, after that brew link automate them with --force and then symlink them (e.g. /usr/local/bin/automake->/usr/local/bin/automake-1.14).  


Note: If brew complains about not having a formula for octave, the following command should fix it:
Note: If brew complains about not having a formula for octave, the following command should fix it:

Revision as of 16:45, 13 November 2013

GNU Octave is primarily developed on GNU/Linux and other POSIX conformant systems. GNU Octave for Mac OS X is readily available using package managers such as Fink, MacPorts, and Homebrew.

About version numbers (as of May 2012):

  • The 3.6.x are current releases.
  • The 3.4.x are previous releases.
  • The 3.2.x are very old releases.

Manual Installation from Source

The page Octave for Mac provides minimalistic instructions for building Octave from source on Mac OS X. Additional support for those who need assistance in building Octave is available.

Package Managers

A package manager is a software tool to automate the process of installing, upgrading, configuring, and removing software packages for a computer's operating system in a consistent manner. It typically maintains a database of software dependencies and version information to prevent software mismatches and missing prerequisites. Packages are distributions of software, applications and data. Packages also contain metadata, such as the software's name, description of its purpose, version number, vendor, checksums, and a list of dependencies necessary for the software to run properly. Upon installation, metadata is stored in a local package database. Operating systems based on Linux and other Unix-like systems typically consist of hundreds or even thousands of distinct software packages; in the former case, a package management system is a convenience, in the latter case it becomes essential.

There are three reputable package managers available for Mac OS X. GNU Octave for Mac OS X is readily available using package managers such as Fink, MacPorts, and Homebrew.

The most recent version of Fink's Octave package, MacPorts' Octave port, and Homebrew's Octave formula are generally not the same. Please check the web sites for these package managers to determine if the version of Octave you desire is available.

XCode Dependency

Each package manager requires that XCode be installed. In part this is to provide an initial set of development tools. It *may* be possible to substitute the Mac OS X gcc Installer by Kenneth Reitz, but this alternative has not yet been tested. If any curious/industrious users experiment with using Kenneth's solution over Apple's XCode, please let Octave's developers know of the results. Or, if you prefer, just update the itemized list below. It is recommended that users with XCode already installed avoid installing Kenneth's solution, as it may break your existing XCode installation.

  • Fink: The Mac OS X gcc Installer has not been tested.
  • MacPorts: The Mac OS X gcc Installer has not been tested.
  • Homebrew: The Mac OS X gcc Installer has not been tested.

Fink

The Fink project is an effort to port and package open-source Unix programs to Mac OS X. Fink uses dpkg and APT (Debian's package management system), as well as its own frontend program, fink (which is implemented as a set of Perl modules).

Simple Installation Instructions

  • Install XCode via the Mac App Store.
    • Once installed, install the Command Line Tools from XCode's Apple Menu > Preferences > Downloads.
  • Follow Fink's installation instructions. For those who prefer it, there is a GUI available for Fink, Fink Commander.
  • Fink has excellent support for Octave and includes recent as well as dated versions. A list of what Fink has available for Octave is here. To install the latest Octave, type sudo fink install octave at the Terminal's command line. For those running the 64 bit version of Fink, it is recommended that octave-atlas be installed instead as there are some bugs/features with Apple's vecLib for the X86_64 architecture. Octave has many dependencies which will be downloaded and installed prior to Octave. The entire installation process can take a few hours.
  • Fink should also be used to install [packages for Octave. For example, the control systems package for Lion may be installed by typing fink install control-atlas-oct362 at a terminals command line.

For the doc() function to be supported by Octave, either the unversioned octave, octave-atlas, or octave-ref package must be installed. Essentially, those features used at run-time which don't have a version somewhere in the file path are included in these packages.

MacPorts

MacPorts, formerly called DarwinPorts, is a package management system that simplifies the installation of software on the Mac OS X and Darwin operating systems. It is a free/open source software project to simplify installation of other free/open source software. Similar in aim and function to Fink and the BSDs' ports collections, DarwinPorts was started in 2002 as part of the OpenDarwin project, with the involvement of a number of Apple Inc. employees including Landon Fuller, Kevin Van Vechten, and Jordan Hubbard.

Simple Installation Instructions

  • Install XCode via the Mac App Store.
  • Follow MacPorts' installation instructions.
  • MacPorts has good support for Octave. A list of what MacPorts has available for Octave is here. To install the most recent version of Octave, type sudo port install octave-devel +atlas+docs at the Terminal's command line. Octave has many dependencies which will be downloaded and installed prior to Octave. The entire installation process can take a few hours.
  • The variant installed may be important to the user's experience. The available variants for octave-devel are displayed by typing port variants octave-devel. It is recommended that the user include +atlas+docs. This will avoid bugs present in Apple's vecLib and enable support for Octave's doc() function.

Homebrew

Homebrew is a package management system that simplifies the installation of software on Mac OS X. It is a free/open source software project to simplify installation of other free/open source software. It is similar in aim and function to MacPorts and Fink. It was written by Max Howell and has gained popularity in the Ruby on Rails community and earned praise for its extensibility.

Simple Installation Instructions

First, install Homebrew:

  • Install XCode via the Mac App Store.
    • Once installed, install the Command Line Tools from XCode's Apple Menu > Preferences > Downloads.
  • Follow Homebrew's installation instructions.
  • Import the scientific computing packages, including Octave:
brew tap homebrew/science

To install Octave, update to the latest package definitions, install gfortran, and then Octave:

brew update && brew upgrade
brew install gfortran
brew install octave

You may also need to separately install hdf5 prior to installing octave.

 brew install hdf5 

In the event that brew install of hdf5 fails with No available formula for hdf5 error message, follow the procedure given below

Copy hdf5.rb into /usr/local/Library/Formula. Then run

 brew install hdf5 

Currently as of Nov 13, 2013 you also have to adjust the hdf5 version number to hdf5-1.8.12.tar.bz2 and remove the checksum line below. Should the fltk download fail, you can download http://fltk.org/pub/fltk/1.3.2/fltk-1.3.2-source.tar.gz to /Library/Caches/Homebrew/fltk-1.3.2.tar.gz and resume with brew install octave. If you happen to run into trouble in the last step, building octave, because your autotools are outdated, you can brew install them, after that brew link automate them with --force and then symlink them (e.g. /usr/local/bin/automake->/usr/local/bin/automake-1.14).

Note: If brew complains about not having a formula for octave, the following command should fix it:

brew tap --repair

The command below upgrades Octave and its dependencies to the latest Homebrew-supported versions:

brew update && brew upgrade

Octave has many dependencies which will be downloaded and installed prior to Octave. The entire installation process can take a few hours. Note: On Snow Leopard, Octave requires a X server. If you install without, Homebrew will guide you to the XQuartz project (https://xquartz.macosforge.org) where you can download this.

You might find that you need to add:

setenv ("GNUTERM", "X11")

to your octaverc file, normally located at /usr/local/share/octave/site/m/startup.

In case of trouble, see the Homebrew Troubleshooting Guide, which assists in diagnosing problems and craft useful bug reports. Bugs may be reported at Homebrew-science's issue tracker.

Create a launcher app with AppleScript

  • Open the "AppleScript Editor" application
  • write the following text in the editor window:

tell application "Terminal"
 do script "/path/to/octave; exit"
end tell

or if Octave is in your default path:

tell application "Terminal"
 do script "`which octave`; exit"
end tell

  • Select "Save as ..." from the "File" menu
  • In the menu that appears, select "Application" from the "File format" menu, then navigate to the "Applications" folder and save your script there as "Octave.app"

To change the application icon

  • Open this link in a web browser, right-click and select "copy image".
  • Select "Octave.app" in the Finder, then press command-i to bring up the file info dialog.
  • In the file info dialog, select the icon (in the top left) and press command-v to paste the Octave icon over it.

Installing a Mac OS X Bundle

A reliable App bundle for Octave on Mac OS X is not presently available. The developers would like to be able to provide an App bundle, but need volunteers to support the effort. An approach for producing an App Bundle using MacPorts is being documented here. This approach shows promise, but a few problems must be resolved before a bundle will become available.

Octave and many other software packages may be installed and updated using one of the three package managers available for Mac OS X. To install using a package manager, see the section on Package Managers.

Warning icon.svg
Octave-Forge does have App bundles for old Octave, versions and have problems running on Mac OS 10.6 and above. The latest App bundle does not provide full support for the printing, or the documentation features of Octave. Other features may be missing as well. For individuals who'd like to use it anyway please carefully follow the instructions for Installing Mac OS X Bundle.