Difference between revisions of "TISEAN package"
m (→False Nearest Neighbors: added a little more info) 
m (→False Nearest Neighbors: typo) 

Line 24:  Line 24:  
dim_hen_noisy, frac_hen_noisy, 'gx', 'markersize', 15);  dim_hen_noisy, frac_hen_noisy, 'gx', 'markersize', 15);  
</syntaxhighlight>}}  </syntaxhighlight>}}  
−  The {{Codelinedim_*}} variables hold the dimension so here 1:5, and {{Codelinefrac_*}} contain the fraction of false nearest neighbors. From this chart we can obtain the sufficient embedding dimension for each system. For a Henon Map {{Codelinem = 2}} is sufficient, but for an Ikeda map it is better to use {{Codelinem = 3}}.  +  The {{Codelinedim_*}} variables hold the dimension (so here 1:5), and {{Codelinefrac_*}} contain the fraction of false nearest neighbors. From this chart we can obtain the sufficient embedding dimension for each system. For a Henon Map {{Codelinem = 2}} is sufficient, but for an Ikeda map it is better to use {{Codelinem = 3}}. 
=== Nonlinear Prediction ===  === Nonlinear Prediction === 
Revision as of 17:04, 1 June 2015
Contents
Porting TISEAN
This section will focus on demonstrating the capabilities of the TISEAN package. The previous information about the porting procedure has been moved here.
Tutorials
These tutorials are based on examples, tutorials and the articles located on the TISEAN website:
http://www.mpipksdresden.mpg.de/~tisean/Tisean_3.0.1/.
This tutorial will utilize the following dataset:
Please download it as the tutorial will reference it.
False Nearest Neighbors
This function uses a method to determine the minimum sufficient embedding dimension. As a demonstration we will create a plot that contains an Ikeda Map, a Henon Map and a Henon Map corrupted by 10% of Gaussian noise.
Code: Analyzing false nearest neighbors 
# Create maps
ikd = ikeda (10000);
hen = henon (10000);
hen_noisy = hen + std (hen) * 0.02 .* (6 + sum (rand ([size(hen), 12]), 3));
# Create and plot false nearest neighbors
[dim_ikd, frac_ikd] = false_nearest (ikd(:,1));
[dim_hen, frac_hen] = false_nearest (hen(:,1));
[dim_hen_noisy, frac_hen_noisy] = false_nearest (hen_noisy(:,1));
plot (dim_ikd, frac_ikd, 'b*', 'markersize', 15,...
dim_hen, frac_hen, 'r+', 'markersize', 15,...
dim_hen_noisy, frac_hen_noisy, 'gx', 'markersize', 15);

The dim_*
variables hold the dimension (so here 1:5), and frac_*
contain the fraction of false nearest neighbors. From this chart we can obtain the sufficient embedding dimension for each system. For a Henon Map m = 2
is sufficient, but for an Ikeda map it is better to use m = 3
.
Nonlinear Prediction
In this section we will demonstrate some functions from the 'Nonlinear Prediction' chapter of the TISEAN documentation (located here). For now this section will only demonstrate functions that are connected to the Simple Nonlinear Prediction section.
There are three functions in this section: lzo_test
, lzo_gm
and lzo_run
. The first is used to estimate the forecast error for a set of chosen parameters, the second gives the some global information about the fit and the third produces predicted points. Let us start with the first one (before completing starting this example remember to download 'amplitude.dat' from above and start Octave in the directory that contains it). The pairs of parameters (m,d)
where chosen after the TISEAN documentation.
Code: Analyzing forecast errors for various parameters 
# Load data
load amplitude.dat
# Create different forecast error results
steps = 200;
res1 = lzo_test (amplitude(1:end200), 'm', 2, 'd', 6, 's', steps);
res2 = lzo_test (amplitude(1:end200), 'm', 3, 'd', 6, 's', steps);
res3 = lzo_test (amplitude(1:end200), 'm', 4, 'd', 1, 's', steps);
res4 = lzo_test (amplitude(1:end200), 'm', 4, 'd', 6, 's', steps);
plot (res1(:,1), res1(:,2), 'r;m = 2, d = 6;', ...
res2(:,1), res2(:,2), 'g;m = 3, d = 6;',...
res3(:,1), res3(:,2), 'b;m = 4, d = 1;',...
res4(:,1), res4(:,2), 'm;m = 4, d = 6;');

It seems that the last pair (m = 4, d = 6)
is suitable. We will use it to determine the the best neighborhood to use when generating future points.
Code: Determining the best neighborhood size using lzo_gm 
gm = lzo_gm (amplitude(1:end200), 'm', 4, 'd', 6, 's', steps, 'rhigh', 20);

After analyzing gm
it is easy to observe that the least error is for the first neighborhood size of gm
which is equal to 0.49148. We will use it to produce the prediction vectors. Only the first 4800 datapoints from amplitude
are used in order to compare the predicted values with the actual ones for the last 200 points.
Code: Creating forecast points 
steps = 200;
forecast = lzo_run (amplitude(1:end200), 'm', 4, 'd', 6, 'r', 0.49148, 'l', steps);
forecast_noisy = lzo_run (amplitude(1:end200), 'm', 4, 'd', 6, 'r', 0.49148, ...
'dnoise', 10, 'l', steps);
plot (amplitude(end199:end), 'g;Actual Data;', ...
forecast, 'r.;Forecast Data;',...
forecast_noisy, 'bo;Forecast Data with 10% Dynamic Noise;');

The difference between finding the proper r
and not finding it can be very small.
The produced data is the best local zeroth order fit on the amplitude.dat
for (m = 4, d = 6)
.
Nonlinear Noise Reduction
This tutorial show different methods of the 'Nonlinear Noise Reduction' section of the TISEAN documentation (located here). It shows the use of simple nonlinear noise reduction (function lazy
) and locally projective nonlinear noise reduction (function ghkss
). To start let's create noisy data to work with.
Code: Creating a noisy henon map 
hen = henon (10000);
hen = hen(:,1); # We only need the first column
hen_noisy = hen + std (hen) * 0.02 .* (6 + sum (rand ([size(hen), 12]), 3));

This created a Henon map contaminated by 2% Gaussian noise à la TISEAN. In the tutorials and exercises on the TISEAN website this would be equivalent to calling makenoise %2
on the Henon map.
Next we will reduce the noise using simple nonlinear noise reduction lazy
.
Code: Simple nonlinear noise reduction 
clean = lazy (hen_noisy,7,0.06,3);
# Create delay vectors for both the clean and noisy data
delay_clean = delay (clean);
delay_noisy = delay (hen_noisy);
# Plot both on one chart
plot (delay_noisy(:,1), delay_noisy(:,2), 'b.;Noisy Data;','markersize',3,...
delay_clean(:,1), delay_clean(:,2), 'r.;Clean Data;','markersize',3)

On the chart created the red dots represent cleaned up data. It is much closer to the original than the noisy blue set.
Now we will do the same with ghkss
.
Code: Locally projective nonlinear noise reduction 
clean = ghkss (hen,'m',7,'q',2,'r',0.05,'k',20,'i',2);

The rest of the code is the same as the code used in the lazy
example.
Once both results are compared it is quite obvious that for this particular example ghkss
is superior to lazy
. The TISEAN documentation points out that this is not always the case.
External links
 Bitbucket repository where the porting is taking place.
 TISEAN package website where the package is described along with references to literature, tutorials and manuals.