# Difference between revisions of "TISEAN package"

## Porting TISEAN

This section will focus on demonstrating the capabilities of the TISEAN package. The previous information about the porting procedure has been moved here.

Current ideas and future plans are available on a board loacated here

## Tutorials

These tutorials are based on examples, tutorials and the articles located on the TISEAN website:
http://www.mpipks-dresden.mpg.de/~tisean/Tisean_3.0.1/.
This tutorial will utilize the following dataset:

### False Nearest Neighbors

This function uses a method to determine the minimum sufficient embedding dimension. It is based on the False Nearest Neighbors section of the TISEAN documentation. As a demonstration we will create a plot that contains an Ikeda Map, a Henon Map and a Henon Map corrupted by 10% of Gaussian noise.

 Code: Analyzing false nearest neighbors ```# Create maps ikd = ikeda (10000); hen = henon (10000); hen_noisy = hen + std (hen) * 0.02 .* (-6 + sum (rand ([size(hen), 12]), 3)); # Create and plot false nearest neighbors [dim_ikd, frac_ikd] = false_nearest (ikd(:,1)); [dim_hen, frac_hen] = false_nearest (hen(:,1)); [dim_hen_noisy, frac_hen_noisy] = false_nearest (hen_noisy(:,1)); plot (dim_ikd, frac_ikd, '-b*;Ikeda;',... dim_hen, frac_hen, '-r+;Henon;',... dim_hen_noisy, frac_hen_noisy, '-gx;Henon Noisy;'); ```

The `dim_*` variables hold the dimension (so here 1:5), and `frac_*` contain the fraction of false nearest neighbors. From this chart we can obtain the sufficient embedding dimension for each system. For a Henon Map `m = 2` is sufficient, but for an Ikeda map it is better to use `m = 3`.

### Finding Unstable Periodic Orbits

Here I will demonstrate how to find unstable periodic orbits. This section is based on the TISEAN documentation chapter Finding unstable periodic orbits. We will start by finding these orbits using function `upo`.

 Code: Finding unstable periodic orbits ```# Create maps hen = henon (1000); hen = hen + std (hen) * 0.02 .* (-6 + sum (rand ([size(hen), 12]), 3)); # Find orbits [lengths, data] = upo(hen(:,1), 2, 'p',6,'v',0.1, 'n', 100); ```

The vector `lengths` contains the size of each of the found orbits and `data` contains their coordinates. To obtain delay coordinates and plot these orbits onto the original data we will use `upoembed`.

 Code: Plotting unstable periodic orbits ```# Create delay coordinates for the orbits and data up = upoembed (lengths, data, 1); delay_hen = delay (hen(:,1)); # Plot all of the data plot (delay_hen(:,1), delay_hen(:,2), 'r.;Noisy Henon;','markersize',2,... up{4}(:,1), up{4}(:,2),'gx;Fixed Point;','markersize',20,'linewidth',1, ... up{3}(:,1), up{3}(:,2),'b+;Period 2;','markersize',20,'linewidth',1, ... up{2}(:,1), up{2}(:,2),'ms;Period 6;','markersize',20,'linewidth',1, ... up{1}(:,1), up{1}(:,2),'cs;Period 6;','markersize',20,'linewidth',1); ```

The plotting options are passed to make the orbits more visible.

### Nonlinear Prediction

In this section we will demonstrate some functions from the 'Nonlinear Prediction' chapter of the TISEAN documentation (located here). For now this section will only demonstrate functions that are connected to the Simple Nonlinear Prediction section.
There are three functions in this section: `lzo_test`, `lzo_gm` and `lzo_run`. The first is used to estimate the forecast error for a set of chosen parameters, the second gives some global information about the fit and the third produces predicted points. Let us start with the first one (before starting this example remember to download 'amplitude.dat' from above and start Octave in the directory that contains it). The pairs of parameters `(m,d)` where chosen after the TISEAN documentation.

 Code: Analyzing forecast errors for various parameters ```# Load data load amplitude.dat # Create different forecast error results steps = 200; res1 = lzo_test (amplitude(1:end-200), 'm', 2, 'd', 6, 's', steps); res2 = lzo_test (amplitude(1:end-200), 'm', 3, 'd', 6, 's', steps); res3 = lzo_test (amplitude(1:end-200), 'm', 4, 'd', 1, 's', steps); res4 = lzo_test (amplitude(1:end-200), 'm', 4, 'd', 6, 's', steps); plot (res1(:,1), res1(:,2), 'r;m = 2, d = 6;', ... res2(:,1), res2(:,2), 'g;m = 3, d = 6;',... res3(:,1), res3(:,2), 'b;m = 4, d = 1;',... res4(:,1), res4(:,2), 'm;m = 4, d = 6;'); ```

It seems that the last pair `(m = 4, d = 6)` is suitable. We will use it to determine the the best neighborhood to use when generating future points.

 Code: Determining the best neighborhood size using lzo_gm ```gm = lzo_gm (amplitude(1:end-200), 'm', 4, 'd', 6, 's', steps, 'rhigh', 20); ```

After analyzing `gm` it is easy to observe that the least error is for the first neighborhood size of `gm` which is equal to 0.49148. We will use it to produce the prediction vectors. Only the first 4800 datapoints from `amplitude` are used in order to compare the predicted values with the actual ones for the last 200 points.

 Code: Creating forecast points ```steps = 200; forecast = lzo_run (amplitude(1:end-200), 'm', 4, 'd', 6, 'r', 0.49148, 'l', steps); forecast_noisy = lzo_run (amplitude(1:end-200), 'm', 4, 'd', 6, 'r', 0.49148, ... 'dnoise', 10, 'l', steps); plot (amplitude(end-199:end), 'g;Actual Data;', ... forecast, 'r.;Forecast Data;',... forecast_noisy, 'bo;Forecast Data with 10% Dynamic Noise;'); ```

The difference between finding the proper `r` and not finding it can be very small.
The produced data is the best local zeroth order fit on the `amplitude.dat` for `(m = 4, d = 6)`.

### Nonlinear Noise Reduction

This tutorial show different methods of the 'Nonlinear Noise Reduction' section of the TISEAN documentation (located here). It shows the use of simple nonlinear noise reduction (function `lazy`) and locally projective nonlinear noise reduction (function `ghkss`). To start let's create noisy data to work with.

 Code: Creating a noisy henon map ```hen = henon (10000); hen = hen(:,1); # We only need the first column hen_noisy = hen + std (hen) * 0.02 .* (-6 + sum (rand ([size(hen), 12]), 3)); ```

This created a Henon map contaminated by 2% Gaussian noise à la TISEAN. In the tutorials and exercises on the TISEAN website this would be equivalent to calling `makenoise -%2` on the Henon map.
Next we will reduce the noise using simple nonlinear noise reduction `lazy`.

 Code: Simple nonlinear noise reduction ```clean = lazy (hen_noisy,7,-0.06,3); # Create delay vectors for both the clean and noisy data delay_clean = delay (clean); delay_noisy = delay (hen_noisy); # Plot both on one chart plot (delay_noisy(:,1), delay_noisy(:,2), 'b.;Noisy Data;','markersize',3,... delay_clean(:,1), delay_clean(:,2), 'r.;Clean Data;','markersize',3) ```

On the chart created the red dots represent cleaned up data. It is much closer to the original than the noisy blue set.
Now we will do the same with `ghkss`.

 Code: Locally projective nonlinear noise reduction ```clean = ghkss (hen,'m',7,'q',2,'r',0.05,'k',20,'i',2); ```

The rest of the code is the same as the code used in the `lazy` example.
Once both results are compared it is quite obvious that for this particular example `ghkss` is superior to `lazy`. The TISEAN documentation points out that this is not always the case.

### Lyapunov Exponents

Here I will demonstrate how to use the function `lyap_k`. It creates Lyapunov Exponents for a time series (more information available from the TISEAN documentation located here). In this tutorial we will create a Lyapunov Exponent for various embedding dimensions and then plot them.

 Code: Creating Lyapunov exponents ```# Create time series in = sin((1:2500).'./360) + cos((1:2500).'./180); # Create Lyapunov exponents mmax_val = 20 lyap_exp = lyap_k (in, 'mmin',2,'mmax',mmax_val,'d',6,'s',400,'t',500); ```

In this function the output (`lyap_exp` is a `5 x 20` struct array. We will only use one row for the plot.

 Code: Plotting Lyapunov exponents ```cla reset hold on for j=2:mmax_val plot (lyap_exp(1,j-1).exp(:,1),lyap_exp(1,j-1).exp(:,2),'r'); endfor xlabel ("t [flow samples]"); ylabel ("S(eps, embed, t)"); hold off ```