FAQ: Difference between revisions

From Octave
Jump to navigation Jump to search
m (→‎Pre-compiled binary packages: Corrected link to moved page)
Tags: Mobile edit Mobile web edit
 
(295 intermediate revisions by 69 users not shown)
Line 1: Line 1:
This is a list of frequently asked questions (FAQ) for Octave users.
This is a list of frequently asked questions (FAQ) for GNU Octave users.


We are always looking for new questions (with answers), better answers, or both. Feel free to edit this page with your changes. If you have general questions about Octave, or need help for something that is not covered by the Octave manual or the FAQ, please use the help@octave.org mailing list.
We are always looking for new questions (with answers), better answers, or both. Feel free to edit this page with your changes.


This FAQ is intended to supplement, not replace, the Octave manual. Before posting a question to the help@octave.org mailing list, you should first check to see if the topic is covered in the manual.
=Where do I get additional help?=
 
If you can't find an answer to your question in this FAQ, wiki, or in the [http://www.octave.org/doc/interpreter manual] ([http://www.octave.org/octave.pdf PDF]) you can:
 
* Search for an answer in our [https://lists.gnu.org/archive/html/help-octave/ mailing list archives]
* Contact our user community using our [https://octave.discourse.group Octave Discourse].
* Contact our user community using our [https://webchat.freenode.net/?channels=octave IRC chat room <code>#octave</code> in Freenode]
 
<div class="tocinline">__TOC__</div>
 
=== Support expectations ===
See [https://octave.org/support-expectations.html Support Expectations]
 
Also this [https://www.commitstrip.com/en/2014/05/07/the-truth-behind-open-source-apps/ CommitStrip]


=General=
=General=
Line 9: Line 22:
==What is Octave?==
==What is Octave?==


Octave is a high-level interactive language, primarily intended for numerical computations that is mostly compatible with Matlab.1
[https://www.gnu.org/software/octave/ GNU Octave] is a high-level interpreted language, primarily intended for numerical computations.  It provides capabilities for the numerical solution of linear and nonlinear problems, and for performing other numerical experiments.  It also provides extensive graphics capabilities for data visualization and manipulation.  GNU Octave is normally used through its interactive interface ([https://en.wikipedia.org/wiki/Command-line_interface CLI] and [https://en.wikipedia.org/wiki/Graphical_user_interface GUI]), but it can also be used to write non-interactive programs.
The GNU Octave language is quite similar to Matlab so that most programs are easily portable.


Octave can do arithmetic for real, complex or integer-valued scalars and matrices, solve sets of nonlinear algebraic equations, integrate functions over finite and infinite intervals, and integrate systems of ordinary differential and differential-algebraic equations.
The GNU Octave distribution includes a [http://www.octave.org/octave.pdf 1000+ page Texinfo manual].  Access to the complete text of the manual is available via the <code>doc</code> command at the GNU Octave prompt.


Octave uses the GNU readline library to handle reading and editing input. By default, the line editing commands are similar to the cursor movement commands used by GNU Emacs, and a vi-style line editing interface is also available. At the end of each session, the command history is saved, so that commands entered during previous sessions are not lost.
==What is Octave Forge?==


The Octave distribution includes a 650+ page Texinfo manual. Access to the complete text of the manual is available via the doc command at the Octave prompt.
[https://octave.sourceforge.io/ Octave Forge] is a collection of [[packages]] for GNU Octave, something similar to the Matlab toolboxes.  When talking about the two projects at the same time, GNU Octave is usually referred to as Octave core (or just "core").  Octave Forge also serves as a test bed for code that may eventually end up in the core, and distributes binaries for systems with a lack of developers tools (mainly Windows).


==Who uses Octave?==
==Who uses Octave?==


Lots of people. It seems that universities use it for research and teaching, companies of all sizes, for development, individuals. This question comes often on Octave mailing lists, see [[WhoUsesOctave]] for a few answers
A huge number of people ranging from students to researchers involved in various fields such as statistics,Machine Learning, data analytics, etc. Universities use it for research and teaching, companies of all sizes for development and individuals for certain private purposes. See [[Who Uses Octave?]] for more clarity.


==Who develops Octave?==
==Who develops Octave?==


Discussions about writing the software that would eventually become Octave started in about 1988 with James B. Rawlings and John W. Eaton at the University of Texas. John W. Eaton was the original author of Octave, starting full-time development in February 1992. He is still the primary maintainer. The community of users/developers has in addition contributed some code and fuels the discussion on the mailing lists help@octave.org (user forum), maintainers@octave.org (development issues), and octave-dev@lists.sourceforge.net (all things related to the Octave Forge repository of user-contributed functions).
Discussions about writing the software that would eventually become Octave started in about 1988 with James B. Rawlings and [http://jweaton.org/ John W. Eaton] at the University of Texas. John W. Eaton is the original author of Octave, starting full-time development in February 1992. He is still the primary maintainer. The community of users and developers has in addition contributed some code and fuels the discussion on the mailing lists [https://lists.gnu.org/mailman/listinfo/help-octave help@octave.org] (user forum), [https://lists.gnu.org/mailman/listinfo/octave-maintainers maintainers@octave.org] (development issues). Since 2011, GNU Octave regularly  participates in [[Summer of Code]] events as a mentor organisation. As part of those events, several students contributed to Octave by helping in removal of bugs and development of new features.
 
==Why "Octave"?==
 
Octave's name has nothing to do with music.  It is named after [http://en.wikipedia.org/wiki/Octave_Levenspiel Octave Levenspiel], a former professor of John who was famous for his ability to do quick back-of-the-envelope calculations. You can hear John pronounce the name "Octave" a few times [http://videolectures.net/mloss08_eaton_oct/ in this video].  We hope that GNU Octave will help perform computations with the same ease as Dr. Levenspiel.
 
==Why "GNU" Octave?==
 
The [https://www.gnu.org/ GNU Project] was launched in 1984 to develop a complete Unix-like operating system which is free software: the GNU system.  GNU is a recursive acronym for "GNU's Not Unix"; it is pronounced [https://www.gnu.org/gnu/pronunciation.en.html g'noo].


==Why '''GNU''' Octave?==
The [https://www.fsf.org/ Free Software Foundation (FSF)] is the principal organization that has sponsored the GNU Project.


The GNU Project was launched in 1984 to develop a complete Unix-like operating system which is free software: the GNU system.
Octave became GNU Octave in 1997 (beginning with [[Release History|version 2.0.6]]).  This meant agreeing to consider Octave a part of the GNU Project and support the efforts of the FSF.  A big part of this effort is to adhere to the [https://www.gnu.org/prep/standards/standards.html GNU coding standards] and to benefit from GNU's infrastructure (e.g. [https://hg.savannah.gnu.org/hgweb/octave/ code hosting] and [http://bugs.octave.org bug tracking]).  Additionally, Octave receives [https://my.fsf.org/donate/working-together/octave sponsorship] from the FSF's Working Together fund.  However, Octave is not and has never been developed by the FSF.


GNU is a recursive acronym for “GNU's Not Unix”; it is pronounced guh-noo, approximately like canoe.
==How can I cite Octave?==


The Free Software Foundation (FSF) is the principal organizational sponsor of the GNU Project.
Octave is free software and does not legally bind you to cite it.  However, we have invested a lot of time and effort in creating GNU Octave, and we would appreciate if you would cite if you used. To cite GNU Octave in publications use:


Octave became GNU Octave in 1997 (beginning with version 2.0.6). This meant agreeing to consider Octave a part of the GNU Project and support the efforts of the FSF. A big part of this effort is to adhere to the [http://www.gnu.org/prep/standards/standards.html GNU coding standards] and to benefit from GNU's infrastructure (e.g. [http://hg.savannah.gnu.org/hgweb/octave/ code hosting] and [http://bugs.octave.org bug tracking]). Additionally, Octave receives [https://my.fsf.org/donate/working-together/octave sponsorship] from the FSF's Working Together fund. However, Octave is not and has never been developed by the FSF.
  John W. Eaton, David Bateman, Søren Hauberg, Rik Wehbring ({{Release Year}}).
  GNU Octave version {{Release}} manual: a high-level interactive language for numerical computations.
  URL https://octave.org/doc/v{{Release}}/


For more information about the GNU project, see http://www.gnu.org.
A [https://en.wikipedia.org/wiki/BibTeX BibTeX] entry for [https://en.wikipedia.org/wiki/LaTeX LaTeX] users is:


==What version should I use?==
  @manual{,
    title    = {{GNU Octave} version {{Release}} manual: a high-level interactive language for numerical computations},
    author    = {John W. Eaton and David Bateman and S{\o}ren Hauberg and Rik Wehbring},
    year      = <span>{</span>{{Release Year}}},
    url      = {[https://octave.org/doc/v{{Release}}/ https://octave.org/doc/v{{Release}}/]},
  }


In general, you will find the latest version on http://www.octave.org/download.html. It is recommended to use the stable version of octave for general use, and the development version if you want the latest features and are willing to tolerate instability.
Run {{manual|citation}} at the Octave prompt for details on how to best cite the Octave version you are running.  Certain Octave packages also have recommended citations in which case use <code>citation package_name</code>.


A list of user-visible changes since the last release is available in the file NEWS. The file ChangeLog in the source distribution contains a more detailed record of changes made since the last release.
Note that there are two reasons for citing the software used.  One is giving recognition to the work done by others which we have already addressed to. The other is giving details on the system used so that experiments can be replicated.  For this, you should cite the version of Octave and all packages used (you can get this information using the <code>ver</code> command), as well as any details of your setup as part of your Methods.  In addition, you should make your source available as well. See [http://software.ac.uk/so-exactly-what-software-did-you-use How to cite and describe software] for more details and an in depth discussion for the same.


==On what platforms does Octave run?==
==What documentation exists for Octave?==
 
Besides this wiki, the GNU Octave distribution includes a [http://www.octave.org/doc/interpreter 1000+ page Texinfo manual] ([http://www.octave.org/octave.pdf PDF]).  Access to the complete text of the manual is available via the {{manual|doc}} command at the GNU Octave prompt.  If you have problems using this manual, or find that some topic is not adequately explained, indexed, or cross-referenced, please report it on http://bugs.octave.org.
 
==How can I report a bug in Octave?==
 
Please read our website http://www.octave.org/bugs.html.
 
 
= Common problems =
 
== Octave does not start ==
 
The following steps have been the solution to several bug reports and help requests.  Please try them before asking for further support.  If nothing below helps, please give us the following information:
 
* Operating system: e.g. [https://support.microsoft.com/en-us/help/13443/windows-which-version-am-i-running '''MS Windows 10 (version 2004)'''] or '''Ubuntu 20.04'''
* GNU Octave version: e.g. '''Version {{Release}}'''
* Installation method: e.g. '''Downloaded and installed "octave-{{Release}}-w64-installer.exe" from https://www.octave.org/download.html'''


Octave runs on various Unices—at least Linux and Solaris, Mac OS X, Windows and anything you can compile it on. Binary distributions exist at least for Debian, SUSE, Fedora and RedHat Linuxes (Intel and AMD CPUs, at least), for Mac OS X and Windows' 98, 2000, XP, Vista, and 7.
=== MS Windows ===


Two and three dimensional plotting is fully supported using gnuplot and an experimental OpenGL backend.
* After Octave upgrade the GUI does not open / shuts down immediately.
** '''Solution:'''
*** Version 5.2.0 and older: Delete the folder {{path|C:\Users\YOUR_USER_NAME\.config\octave}}
*** Version 6.1.0 and newer: Delete the folder {{path|%APPDATA%\octave}}, which generally is located at {{path|C:\Users\YOUR_USER_NAME\AppData\Roaming\octave}}
* Missing/conflicting files.
** '''Solution:''' Remove/Uninstall all existing Octave versions.  Restart the system.  Install GNU Octave again.


The underlying numerical solvers are currently standard Fortran ones like LAPACK, LINPACK, ODEPACK, the BLAS, etc., packaged in a library of C++ classes. If possible, the Fortran subroutines are compiled with the system's Fortran compiler, and called directly from the C++ functions. If that's not possible, you can still compile Octave if you have the free Fortran to C translator f2c.
* Permission errors
** '''Solution 1:''' Octave versions prior to version 7.1.0 on MS Windows used VBS scripts to start the program.  You can test whether your system is blocking VBS scripts by doing the following:
**# Using Notepad or another text editor, create a text file containing only the text: <pre>msgbox("This is a test script, Click OK to close")</pre>
**# Save the file on your Desktop with the name {{Path|testscript.vbs}} (be sure that the editor didn't end it in .txt or .vbs.txt).
**# Double click the file.  If scripts can run, a popup window will appear with that message.
**#* If the file opens in notepad or an editor, it means it still ended in .txt.  MS Windows insecurely hides file extensions by default.  To show file extensions follow [https://answers.microsoft.com/en-us/windows/forum/all/in-win10-how-to-show-the-file-extension-for/ed21ff20-cdb3-4263-9c7d-fc6ed125fc82 these instructions at Microsoft.com].
**#* If both {{Path|testscript.vbs}} and {{Path|octave.vbs}} open a text- or other editor, it means your MS Windows file associations have .vbs files associated with another program. To fix this, right click the .vbs file, select "Open With", select "Choose Another App", check the box that says "Always use this app to open .vbs files".  Finally, select "Microsoft Windows Based Script Host" from the list.  If it is not in the list, select "More apps".  If still not there, select "Look for Another App on this PC" and navigate to {{Path|C:\Windows\System32\wscript.exe}}, select it, and select "Open".  If {{Path|wscript}} is still not present you will need to seek assistance installing missing MS Windows components.
**# Try moving {{Path|testscript.vbs}} to another location, such as a {{Path|C:\temp folder}}.  Additionally try to move {{Path|testscript.vbs}} in the Octave installation folder containing {{Path|octave.vbs}} and see if VBS scripts can be run there.
**# If {{Path|testscript.vbs}} doesn't run in any of those locations, then scripting appears to be disabled or blocked on your system.  If {{Path|testscript.vbs}} runs in some locations but not others, there there may be other security permissions errors to be solved.  If {{Path|testscript.vbs}} runs in the same folder as {{Path|octave.vbs}}, but directly double-clicking on {{Path|octave.vbs}} does not start Octave, then there appears to be some problem other than script permissions.
** '''Solution 2:''' Consult your malware detection (a.k.a. AntiVirus) software, if files are blocked.
** '''Solution 3:''' Did you install Octave on a network-drive?  Do you have the execution permissions?
** '''Solution 4:''' Is your computer managed by your company?  Does your administrator prohibit script execution?
===Collecting gdb backtrace information===
The following instructions can help you gather troubleshooting information that may help developers identify the problem if the above steps are ineffective:
* if Octave is 'hanging' (the process is remaining open):
*# attempt to start the Octave GUI
*# with the program stalled (either at the GUI, or with the black terminal window), open the Task Manager (right click on taskbar, select Task manager), switch to the "Details" tab, find `octave-gui.exe` on that list, ad take note of the corresponding PID (process ID)
*# Open the folder where Octave is installed. You should find a file called `cmdshell.bat` in the main folder. Run that file, which should open a MSYS2 bash (command line) window.
*# At that prompt, run `gdb -p <em>PID</em>` where <em>PID</em> is the process ID noted previously.
*# at the gdb prompt, execute `set logging on` to save all output to a text file (default will be `gdb.txt`. If you want a different location or filename you can execute `set logging file C:\path\to\file.txt` first).
*# execute `thread apply all bt`.  (If this returns a list longer than one page you may need to 'continue' by typing `c`.)
*# execute `quit` to leave gdb.
*# append that text file to your trouble report at octave.discourse.group or bug report at bugs.octave.org.


Octave is also free software; you can redistribute it and/or modify it under the terms of the GNU General Public License, version 3, as published by the Free Software Foundation, or at your option any later version.
* if Octave is immediately crashing and closing:
*# Open the folder where Octave is installed. You should find a file called `cmdshell.bat` in the main folder. Run that file, which should open a MSYS2 bash (command line) window.
*# At that prompt, run `gdb octave`. (that will start gdb attached to the octave executable.)
*# at the gdb prompt, execute `set logging on` to save all output to a text file (default will be `gdb.txt`. If you want a different location or filename you can execute `set logging file C:\path\to\file.txt` first).
*# At the gdb prompt, execute `r --gui`.  That should attempt to start the Octave in GUI mode.  The gdb prompt should stay unresponsive as long as octave is running.
*# If octave crashes, the gdb prompt should become responsive again. execute `thread apply all bt`.  (If this returns a list longer than one page you may need to 'continue' by typing `c`.)
*# append the text file to your trouble report at octave.discourse.group or bug report at bugs.octave.org.


==How can I cite Octave?==
==I do not see any output of my script until it has finished?==


Pointing to http://www.octave.org is good, because that gives people a direct way to find out more. If citation of a URL is not allowed by a publisher, or if you also want to point to a traditional reference, then you can cite the Octave manual:
By default Octave is set to pass its screen output through a [https://en.wikipedia.org/wiki/Terminal_pager pager] (usually the default pager is "less") which allows things such as navigating through the output with arrow keys or searching for text or regular expressions within the output.  The pager only displays the output after it's finished receiving it, so when it is active you'll not be able to see anything until your script has terminated. To change this behavior temporarily or permanently you may want to use one of the options described [https://www.octave.org/doc/interpreter/Paging-Screen-Output.html in the manual].


    @BOOK{eaton:2008,
==When I try plotting from a script, why am I not seeing anything?==
      author =     "John W. Eaton, David Bateman, and Søren Hauberg",
      title =     "GNU Octave Manual Version 3",
      publisher = "Network Theory Limited",
      year =      "2008",
      isbn =       "0-9546120-6-X"
    }


=Licensing Issues=
If you are running an Octave script that includes a plotting command, the script and Octave may terminate immediately.  So the plot window does show up, but immediately closes when Octave finishes execution.  Alternatively, if using fltk, the plot window needs a readline loop to show up (the time when Octave is sitting around doing nothing waiting for interactive input).


==If I write code using Octave do I have to release it under the GPL?==
A common solution is to put a {{manual|pause}} command at the end of your script.


The answer depends on precisely how the code is written and how it works.
==How do I get sound input or output in MS Windows?==


Code written entirely in the scripting language of Octave (interpreted code in .m files) may be released under the terms of whatever license you choose.
Sound input from a sound card and output to a sound card is fully supported since Octave 4.0.0 for all platforms.  If you have problems with the [https://www.octave.org/doc/interpreter/Audio-Processing.html audio I/O functions] using Octave 4.0.0 or a newer version, please report them on the [http://bugs.octave.org bug tracker].


Code written using Octave's native plug-in interface (also known as a .oct file) necessarily links with Octave internals and is considered a derivative work of Octave and therefore must be released under terms that are compatible with the GPL.
==I have problem X using the latest Octave version==


Code written using Octave's implementation of the Matlab MEX interface may be released under the terms of whatever license you choose, provided that the following conditions are met:
Please be more specific about what you mean by "latest version"?


# The plugin should not use any bindings that are specific to Octave. In other words, the MEX file must use the MEX interface only, and not also call on other Octave internals. It should be possible in principle to use the MEX file with other programs that implement the MEX interface (e.g., Matlab).
* The latest stable version is {{Release}}.  Be aware that you may still have an older version due to whatever distribution method you are using. To get a newer stable version for your system see the following as in accordance to your Operating system: [[Octave for GNU/Linux|GNU/Linux]], [[Octave for macOS|macOS]], or [[Octave for Microsoft Windows|Windows]].
# The MEX file should not be distributed together with Octave in such a way that they effectively create a single work. For example, you should not distribute the MEX file and Octave together in a single package such that Octave automatically loads and runs the MEX file when it starts up. There are other possible ways that you might effectively create a single work; this is just one example.


A program that embeds the Octave interpreter (e.g., by calling the "octave_main" function), or that calls functions from Octave's libraries (e.g., liboctinterp, liboctave, or libcruft) is considered a derivative work of Octave and therefore must be released under terms that are compatible with the GPL.
* If you refer to the latest Mercurial revision, please specify the [https://www.mercurial-scm.org/wiki/ChangeSetID changeset ID] not the revision number, e.g. the output of <code>hg summary</code> or <code>hg id</code>.  Changeset IDs are globally unique across all repos.


==Since the MEX interface allows plugins to be distributed under terms that are incompatible with the GPL, does this mean that you are encouraging people to to write non-free software for Octave?==
If your problem still persists with the "latest version", then please [http://bugs.octave.org/ report a bug] or ask for help at [https://lists.gnu.org/mailman/listinfo/help-octave help@octave.org].  Otherwise, don't be surprised if volunteers are less inclined to help you with a problem that only exists in an older version of Octave and is already fixed in a newer version.


No. The original reason for implementing the MEX interface for Octave was to allow Octave to run free software that uses MEX files (the particular goal was to run SundialsTB in Octave). The intent was to liberate that software from Matlab and increase the amount of free software available to Octave users, not to enable people to write proprietary code for Octave. For the good of the community, we strongly encourage users of Octave to release the code they write for Octave under terms that are compatible with the GPL.
==Why is Octave's floating-point computation wrong?==


==I wrote a program that links with Octave libraries and I don't want to release it under the terms of the GPL. Will you change the license of the Octave libraries for me?==
Floating-point arithmetic is an approximation '''in binary''' to arithmetic on real or complex numbers.  Just like you cannot represent 1/3 exactly in decimal arithmetic (0.333333... is only a rough approximation to 1/3 for any finite number of 3s), you cannot represent some fractions like <math>1/10</math> exactly in base 2.  In binary, the representation to one tenth is <math>0.0\overline{0011}_b</math> where the bar indicates that it repeats infinitely (like how <math>1/6 = 0.1\overline{6}_d</math> in decimal).  Because this infinite repetition cannot be represented exactly with a finite number of digits, rounding errors occur for values that appear to be exact in decimal but are in fact approximations in binary, such as for example how 0.3 - 0.2 - 0.1 is not equal to zero.


No. Instead of asking us to change the licensing terms for Octave, we recommend that you release your program under terms that are compatible with the GPL so that the free software community can benefit from your work the same as you have benefited from the work of all the people who have contributed to Octave.
In addition, some advanced operations are computed by approximation and there is no guarantee for them to be accurate, see [https://en.wikipedia.org/wiki/Rounding#Table-maker.27s_dilemma Table-maker's dilemma] for further references. Their results are system-dependent.


=What's new in version series 3.4.N and 3.5.N of Octave=
This isn't a bug that is limited to GNU-Octave & it happens with any program that uses [https://en.wikipedia.org/wiki/IEEE_754 IEEE 754 floating-point arithmetic]. To be fair, IEEE 754 also specifies decimal floating-point arithmetic, which has never seen wide adoption. The reason why Octave and other programs using IEEE 754 binary floating-point numbers is that they are ''fast'', because they are implemented in hardware or system libraries. Unless you are using very exotic hardware, Octave will use your computer's processor for basic floating-point arithmetic.


The 3.4.N series has enough new features to justify a minor version number change. The full details are in the NEWS file, but in brief 3.4.N series brings:
Another approach to deal with rounding errors is interval arithmetic with the [[Interval package]] or symbolic computations with the [[Symbolic package]]. These approaches are likely to be slower, since not all operations can be performed on Hardware like pure floating-point arithmetic.


* ARPACK now distributed with Octave
To learn more about floating-point arithmetic, consult this [https://en.wikipedia.org/wiki/Floating-point_arithmetic Wikipedia article] or the classical reference by David Goldberg [http://docs.oracle.com/cd/E19957-01/806-3568/ncg_goldberg.html What Every Computer Scientist Should Know About Floating-Point Arithmetic].
* Indexing optimisations
* FTP object using libcurl
* Better consistency with ismatrix, issquare, and issymetric
* Function handles aware of overloaded functions
* More efficient matrix division by making a single LAPACK call
* Other optimisations in matrix operations
* bsxfun optimised for basic arithmetic functions
* Matlab-style ignoring of output arguments using <tt>~</tt>
* Many optimisations of the accumarray function
* Sparse matrix indexing has been rewritten for speed
* Configuration pseudo-variables like page_screen_output accept a  "local" option argument to limit their scope to function scope
* The pkg command now accepts a -forge option to pull packages directly from Octave-forge
* Several dlmread improvements
* Octave now uses gnulib for better cross-platform compatibility


Here are some features that have been around since 3.2.N
==Missing lines when printing under Windows with OpenGL toolkit and Intel integrated GPU==


* integer types
Some windows users with integrated Intel GPUs have reported missing lines when printing with an OpenGL toolkit like FLTK or Qt. {{bug|42534}}
* fixed point arithmetic
* sparse matrices
* linear programming code based on GLPK
* 64-bit compilation support
* gzipped files and stream and consequently support of Matlab v7 files
* better support for both msvc and mingw
* a fully compatible MEX interface
* many many other minor features and compatibility changes
* an experimental OpenGL graphics toolkit to replace gnuplot
* object orient programming
* block comments
* imwrite and imread (based on the GraphicsMagick library)
* Lazy transpose <br/> Special treatment in the parser of things like "a' * b", where the transpose is never explicitly formed but a flag is rather passed to the underlying LAPACK code.
* Single precision type
* Improved array indexing <br/> The underlying code used for indexing of arrays has been completely rewritten and so the indexing of arrays is now significantly faster.


Here are some older features that have been around since 2.1.N:
Users with this kind of problem should try to install/update their Intel OpenGL drivers for Windows or consider installing Mesa drivers from http://qt-project.org/wiki/Cross-compiling-Mesa-for-Windows.


* NDArrays
See also https://www.opengl.org/wiki/FAQ#Why_is_my_GL_version_only_1.4_or_lower.3F .
* cells


The 3.5.N series is the current development release and will become a 3.6.N release in the future. This series brings the following new features:
==Plot hangs and makes the GUI unresponsive==


* Perl compatible regular expressions
If the Qt graphics toolkit is used and "plot" is used for the first time, the fontconfig scanner searches the font directory to build a font cache. This can take up to 3min on slow CPUs. See {{bug|45458}}
* a profiler
* broadcasting enabled for all built-in binary elementwise operators
=What documentation exists for Octave?=


Besides the current wiki, there are other important sources of documentation and help for Octave.
==Error message about invalid call to script or invalid use of script in index expression==


==What documentation exists for Octave?==
If Octave shows an error message about {{Codeline|invalid call to script .../close.m}} or {{Codeline|invalid use of of script .../close.m in index expression}}, it means that you have created a script called close.m that is overriding the built-in Octave function {{Codeline|close}}. Octave functions and scripts share the same global namespace. It is best to avoid creating your own scripts or functions that have the same name as an Octave function as to avoid this error regarding the invalid call to script or invalid use of script in index expression.


The Octave distribution includes a 650+ page manual that is also distributed under the terms of the GNU GPL. It is available on the web at http://www.octave.org/docs.html and you will also find there instructions on how to order a paper version.
=Licensing issues=


The complete text of the Octave manual is also available using the GNU Info system via the GNU Emacs, info, or xinfo programs, or by using the <tt>doc</tt> command to start the GNU info browser directly from the Octave prompt.
==If I write code using Octave do I have to release it under the GPL?==


If you have problems using this documentation, or find that some topic is not adequately explained, indexed, or cross-referenced, please report it on http://bugs.octave.org.
The answer depends on precisely how the code is written and how it works:


==Getting additional help==
* Code written '''entirely in the scripting language of Octave''' (interpreted code in .m files) may be released under the terms of whatever license you choose.


If you can't find an answer to your question, the help@octave.org mailing list is available for questions related to using, installing, and porting Octave that are not adequately answered by the Octave manual or by this document.
* Code written using [https://www.gnu.org/software/octave/doc/interpreter/Oct_002dFiles.html Octave's native code interface] (also known as a .oct file) necessarily links with Octave internals and is considered a derivative work of Octave.  Therefore it must be released under terms that are compatible with the [https://www.gnu.org/licenses/gpl.html GPL].


==User community==
* Code written using [https://www.gnu.org/software/octave/doc/interpreter/Mex_002dFiles.html Octave's implementation of the Matlab MEX interface] may be released under the terms of whatever license you choose, provided that the following conditions are met:


To subscribe to the list, go to http://www.octave.org/archive.html and follow the link to the subscription page for the list.
:# The MEX file may not use any bindings that are specific to Octave, '''it has to use the MEX interface only'''.  In other words, it should be possible in principle to use the MEX file with other programs that implement the MEX interface (e.g., Matlab).  For example including an Octave header file or calling an Octave function within the MEX file, that is not related with Octave's implementation of the MEX interface make the MEX file a derivative work of Octave and has therefore to be released under terms that are compatible with the [https://www.gnu.org/licenses/gpl.html GPL].
:# The MEX file may not be distributed together with Octave in such a way that they effectively create a single work.  For example, you should not distribute the MEX file and Octave together in a single package such that Octave automatically loads and runs the MEX file when it starts up.  There are other possible ways to effectively create a single work.


Please do not send requests to be added or removed from the mailing list, or other administrative trivia to the list itself.
* Code that '''embeds the Octave interpreter''' (e.g., by calling the <code>octave_main</code> function), or that calls functions from Octave's libraries (e.g., liboctinterp, liboctave, or libcruft) is considered a derivative work of Octave and therefore must be released under terms that are compatible with the GPL.


An archive of old postings to the help-octave mailing list is maintained on http://www.octave.org/archive.html.
==Will you change the license of the Octave libraries for me?==


You will also find some user advice and code spread over the web. Good starting points are the Octave Wiki http://wiki.octave.org and Octave-Forge http://octave.sourceforge.net
'''No.''' Instead of asking us to change the licensing terms for Octave, we recommend that you release your program under terms that are compatible with the GPL, this way the free software community can be benefited from your work the same as you were/have benefited from the work of all the people who have contributed to Octave.


We also have [http://www.octave.org/chat.html an IRC chat room].
==Should I favor the MEX interface to avoid the GPL?==


==I think I have found a bug in Octave.==
'''No.''' The original reason for implementing the [https://www.gnu.org/software/octave/doc/interpreter/Mex_002dFiles.html MEX interface] for Octave was to allow Octave to run free software that uses MEX files (the particular goal was to run [https://computation.llnl.gov/projects/sundials/release-history#sundialsTB sundialsTB] in Octave). The intent was to liberate that software from Matlab and increase the amount of free softwares available to Octave users & not to enable people to write proprietary code for Octave. For the good of the community, we strongly encourage users of Octave to release the code they write for Octave under terms that are compatible with the [https://www.gnu.org/licenses/gpl.html GPL].


“I think I have found a bug in Octave, but I'm not sure. How do I know, and who should I tell?
==Why can't I use code from File Exchange in Octave?==


First, see the section [http://www.octave.org/bugs.html on bugs and bug reports in the Octave manual]. When you report a bug, make sure to describe the type of computer you are using, the version of the operating system it is running, and the version of Octave that you are using. Also provide enough code and configuration details of your operating system so that the Octave maintainers can duplicate your bug.
According to the Matlab Central [https://www.mathworks.com/matlabcentral/termsofuse.html Terms of Use] (Last updated: 10-Aug-2016), all submitted code is licensed under the [https://en.wikipedia.org/wiki/BSD_licenses BSD license] by default (cf. § 5 [https://www.mathworks.com/matlabcentral/termsofuse.html Terms of Use]), but it is clearly stated that:


=How can I obtain Octave?=
{{Quote|text=Content submitted to File Exchange may only be used with MathWorks products. | |§ 2(a)(iii) [https://www.mathworks.com/matlabcentral/termsofuse.html Terms of Use]}}


==Source code==
That does not apply to GNU Octave, therefore the usage is in general prohibited.  It should suffice — although interpretations of this vary — to contact the author directly to send you the code personally (maybe released under a free license), or download the code from the author's own website, if available. [[Asking_for_package_to_be_released_under_GPL:_examples|Some examples of letters/email sent to authors for that purpose]].


Source code is available on the Octave development site, where you are sure to get the latest version.
=Installation=


* http://www.octave.org/download.html
==How can I install Octave on Windows?==
* ftp://ftp.octave.org/pub/octave/


Since Octave is distributed under the terms of the GPL, you can get Octave from a friend who has a copy, or from the Octave website.
:'' So as to install GNU-Octave for Windows O.S, refer to : [[Octave for Microsoft Windows]]''


==Pre-compiled binary packages==
==How can I install Octave on MacOS?==


The Octave project does not distribute binary packages, but other projects do. For an up-to-date listing of packagers, see:
:''So as to install GNU-Octave for MacOS, refer to : [[Octave for macOS]]''


* http://www.octave.org/download.html
==How can I install Octave on GNU/Linux?==
* [[Build From Source]]


As of today, Octave binaries are available at least on Debian, Ubuntu, RedHat, Suse and Fedora GNU/Linuxen, Mac OS X, Windows' 98, 2000 and XP, Vista, and 7.
:'' So as to install GNU-Octave on GNU/Linux, refer to: [[Octave for GNU/Linux]]''


==How do I get a copy of Octave for (some other platform)?==
==How to install Octave on Android OR What is the Octave app available in the Google Play store?==


Octave currently runs on Unix-like systems, Mac OS X, and Windows. It should be possible to make Octave work on other systems as well. If you are interested in porting Octave to other systems, please contact [mailto:maintainers@octave.org the maintainers' mailing list].
There is an '''unofficial''' Octave app available for Android in the Google Play store. Please see [[Octave for Android]] for further  information.


=Installation Issues and Problems=  
==How can I install Octave on platform X?==


Octave 3.4 requires approximately 1.3 GB of disk storage to unpack and compile from source (considerably less if you don't compile with debugging symbols). Once installed, Octave requires approximately 355 MB of disk space (again, considerably less if you don't compile with debugging symbols, approximately 50 MB).
Octave currently runs on [[Octave for GNU/Linux|GNU/Linux]], [[Octave for macOS|macOS]], and [[Octave for Microsoft Windows|Windows]]. It should be possible to make Octave work on other systems as well. If you are interested in porting Octave to other systems, please contact the maintainers development mailing list [https://lists.gnu.org/mailman/listinfo/octave-maintainers maintainers@octave.org].


==What else do I need?==
==What Octave version should I use?==


To compile Octave, you will need a recent version of GNU Make. You will also need GCC 4.3 or later, although GCC 4.4 or later is recommended.
For general use, it is recommended to use the latest stable version of Octave (currently {{Release}}), available from http://www.octave.org/download.html.  For development and bleeding-edge features one can obtain the development source code from the Mercurial repository https://hg.savannah.gnu.org/hgweb/octave/graph/.


'''You must have GNU Make to compile octave'''. Octave's Makefiles use features of GNU Make that are not present in other versions of make. GNU Make is very portable and easy to install.
The used version of Octave is available via the {{manual|ver}} command and a list of user-visible changes since the last release is available via the {{manual|news}} command at the GNU Octave prompt.


==Can I compile Octave with another C++ compiler?==
==On what platforms does Octave run?==


Yes, but development is done primarily with GCC, so you may hit some incompatibilities. Octave is intended to be portable to any standard conforming compiler. If you have difficulties that you think are bugs, please report them to the http://bugs.octave.org bug tracker, or ask for help on the [mailto:help@octave.org mailing list].
Octave runs on any platform you can compile it on.  Binary distributions exist for [[Octave for GNU/Linux|GNU/Linux]], [[Octave for macOS|macOS]], and [[Octave for Microsoft Windows|Windows]]. To work fully functional, Octave requires the used platform to support the underlying numerical libraries like [https://en.wikipedia.org/wiki/Basic_Linear_Algebra_Subprograms BLAS], [https://en.wikipedia.org/wiki/LAPACK LAPACK], [http://www.suitesparse.com SuiteSparse], etc., and for plotting [https://www.opengl.org/ OpenGL] or [http://www.gnuplot.info/ gnuplot].


==How can I obtain Octave's source code?==


=Coding=
The latest version of the Octave source code (and older versions) is available from:


==What features are unique to Octave?==
* https://www.octave.org/download.html
* https://ftp.gnu.org/gnu/octave/


Although most of the Octave language will be familiar to Matlab users, it has some unique features of its own.
Since Octave is distributed under the terms of the GPL, you can get Octave from a friend who has a copy.


=== Functions defined on the command-line===
==How can I build Octave from the source code?==
Functions can be defined by entering code on the command line, a feature not supported by Matlab. For example, you may type:


    octave:1> function s = hello_string (to_who)
To use Octave it is usually not required to build it from it's source code.  Binary distributions exist for [[Octave for GNU/Linux|GNU/Linux]], [[Octave for macOS|macOS]], and [[Octave for Microsoft Windows|Windows]].
    > ## Say hello
    > if nargin<1, to_who = "World"; end
    > s = ["Hello ",\
    >      to_who];
    > endfunction
    octave:2> hello_string ("Moon")
    ans = Hello Moon


===Comments with #===
If you have reasons to build Octave from the source code, see [[Building]] for more information.


The pound character, <tt>#</tt>, may be used to start comments, in addition to <tt>%</tt>. See the previous example. The major advantage of this is that as <tt>#</tt> is also a comment character for unix script files, any file that starts with a string like <tt>#! /usr/bin/octave -q</tt> will be treated as an octave script and be executed by octave.
==What do I need to build Octave from the source code?==


===Strings delimited by double quotes "===
For a list of build dependencies, refer to  [[Building]].


The double quote, <tt>"</tt>, may be used to delimit strings, in addition to the single quote <tt>'</tt>. See the previous example. Also, double-quoted strings include backslash interpretation (like C++, C, and Perl) while single quoted are uninterpreted (like Matlab and Perl).
==Do I need GCC to build Octave from the source code?==


===Line continuation by backslash===
No. The development is done primarily with [https://gcc.gnu.org/ GCC], so you may hit some incompatibilities.  Octave is intended to be portable to any standard conforming compiler (for example [https://clang.llvm.org/ clang] is known to work as well).  If you face any difficulties that you think are bugs, please report them to the [http://bugs.octave.org bug tracker], or ask for help on the [https://lists.gnu.org/mailman/listinfo/help-octave help@octave.org mailing list].


Lines can be continued with a backslash, <tt>\</tt>, in addition to three points <tt>...</tt>. See the previous example.
=What's new in Octave?=


===Informative block closing===
Each new Octave release introduces many new features.  A complete list of user visible changes can be seen by running <code>news</code> at the Octave prompt.


You may close function, for, while, if, ... blocks with endfunction, endfor, endwhile, ... keywords in addition to using end. As with Matlab, the end (or endfunction) keyword that marks the end of a function defined in a .m file is optional.
* '''What's new in the next version of Octave?'''
** See the [https://hg.savannah.gnu.org/hgweb/octave/file/tip/NEWS NEWS file] on the development branch.
* '''What was new in Octave Version X.Y.Z?'''
** See [[Release History]].


===Coherent syntax===
=Packages and Octave Forge=


Indexing other things than variables is possible, as in:
==How do I install or load all Octave Forge packages?==


    octave:1> [3 1 4 1 5 9](3)
Do not do it!  Really, there is no reason to do this.  Octave has many packages for different needs and is unlikely that you need all of them.  You either have a small set of required packages, in which case
    ans = 4
you know them by name; or you want them all "just because", in which case you don't really need them.
    octave:2> cos([0 pi pi/4 7])(3)
    ans = 0.70711


In Matlab, it is for example necessary to assign the intermediate result <tt>cos([0 pi pi/4 7])</tt> to a variable before it can be indexed again.
The common misconception is that the more packages one has installed and loaded, the more complete and powerful its Octave installation will be.  However, in the same way one would never install all perl modules, ruby gems, python packages, and C++ libraries (because it simply makes no sense), one should not install all Octave packages.


===Exclamation mark as not operator===
Packages should be installed and loaded selectively.  Note that some packages are meant to shadow core functions changing the way Octave works, and that different packages can have different functions with the same name leading to unpredictable results.


The exclamation mark <tt>!</tt> (aka “Bang!”) is a negation operator, just like the tilde <tt>~</tt>:
If you really really really want to do load all packages, you can with the following:
<syntaxhighlight lang="octave">
## WARNING: loading all packages is probably not the solution you are looking for.
cellfun (@(x) pkg ("load", x.name), pkg ("list"));
</syntaxhighlight>


    octave:1> if ! strcmp (program_name, "octave"),
==I have installed a package but still get a "foo undefined" error?==
    >  "It's an error"
    > else
    >  "It works!"
    > end
    ans = It works!
Note however that Matlab uses the <tt>!</tt> operator for shell escapes, for which Octave requires using the system command.


===Increment and decrement operators===
You have probably forgotten to load the package.  Use {{Codeline|pkg load package-name}} to load it.  Most packages are no longer loaded automatically to avoid surprises.  See reasoning on related FAQ [[FAQ#How_do_I_install_all_Octave_packages.3F|how do I install all Octave packages]].  If you want a specific package to be loaded by default at startup, consider adding the {{Codeline|pkg load}} command on your {{path|[[.octaverc]]}} file.


If you like the <tt>++</tt>, <tt>+=</tt> etc operators, rejoice! Octave includes the C-like increment and decrement operators <tt>++</tt> and <tt>--</tt> in both their prefix and postfix forms, in addition to <tt>+=</tt>, <tt>-=</tt>, <tt>*=</tt>, <tt>/=</tt>, <tt>^=</tt>, <tt>.*=</tt>, <tt>./=</tt>, and <tt>.^=</tt>.
==I cannot install a package. Octave complains about a missing mkoctfile.==


For example, to pre-increment the variable x, you would write ++x. This would add one to x and then return the new value of x as the result of the expression. It is exactly the same as the expression x = x + 1.
You should normally use your distribution's packages.  For Debian and Fedora, Octave package <code>foo</code> will be a deb or rpm called <code>octave-foo</code>, and you should install that instead using <code>apt</code> or <code>yum</code>.


To post-increment a variable x, you would write x++. This adds one to the variable x, but returns the value that x had prior to incrementing it. For example, if x is equal to 2, the result of the expression x++ is 2, and the new value of x is 3.
If you really need to build Octave packages from source to install them, you'll need {{manual|mkoctfile}}. Most distributions split Octave into several packages. The script {{manual|mkoctfile}} is then part of a separate package:


For matrix and vector arguments, the increment and decrement operators work on each element of the operand.
* Debian/Ubuntu: [https://packages.debian.org/stretch/liboctave-dev liboctave-dev]


===Unwind-protect===
* Fedora: {{Codeline|octave-devel}}


In addition to try-catch blocks, Octave supports an alternative form of exception handling modeled after the unwind-protect form of Lisp. The general form of an unwind_protect block looks like this:
==How do I automatically load a package at Octave startup?==


    unwind_protect
When Octave starts, it runs the file {{Path|~/.octaverc}} (in your user's home directory).  If you want Octave to automatically load a package, simply add a <code>pkg load pkg-name</code> command to it.  If the files does not exist, create it.
      body
    unwind_protect_cleanup
      cleanup
    end_unwind_protect


Where body and cleanup are both optional and may contain any Octave expressions or commands. The statements in cleanup are guaranteed to be executed regardless of how control exits body.
If you do this, remember that other people may not have Octave configured to load packages at startup. Therefore, if you write code for others, remember that your programs still need to load the packages they require.


The unwind_protect statement is often used to reliably restore the values of global variables that need to be temporarily changed.
=Octave usage=


Matlab can be made to do something similar with their <tt>OnCleanUp</tt> function that was introduced in 2008a. Octave also has <tt>onCleanup</tt> since version 3.4.0.
==How do I execute an Octave script?==


===Built-in ODE and DAE solvers===
First of all, make sure you understand [http://www.octave.org/doc/interpreter/Script-Files.html the difference between script files and function files].  If you want to execute a function defined in a file, just call the function like any other Octave function: <code>foo(arg1, arg2);</code>


Octave includes LSODE and DASSL for solving systems of stiff ordinary differential and differential-algebraic equations. These functions are built in to the interpreter.
To execute a script from within Octave, just type its name without the <code>.m</code> extension.  Thus, if you have a script called <code>foo.m</code>, just type <code>foo</code> from within the Octave command prompt to execute it. You have to make sure that the script is in your current working directory or in Octave's load path.  Type {{manual|pwd}} to get the current working directory or type {{manual|path}} to see which paths belong to Octave's load path.  The current working directory is referred to as "." in the output of {{manual|path}}.


==How does Octave solve linear systems?==
If the script name has characters that are not valid for an Octave identifier, or if you do not want to use {{manual|addpath}} to add the script's location to the current path, you can use the {{manual|run}} function instead:


In addition to consulting Octave's source for the precise details, you can read the Octave manual for a complete high-level description of the algorithm that Octave uses to decide how to solve a particular linear system, e.g. how the backslash operator <tt>A\x</tt> will be interpreted. Sections [http://www.gnu.org/software/octave/doc/interpreter/Techniques-Used-for-Linear-Algebra.html#Techniques-Used-for-Linear-Algebra Techniques Used for Linear Algebra] and [http://www.gnu.org/software/octave/doc/interpreter/Sparse-Linear-Algebra.html Linear Algebra on Sparse Matrices] from the manual describe this procedure.
<syntaxhighlight lang="octave">
run ("Script Name With Spaces.m")
run ("/opt/local/foo.m")
</syntaxhighlight>


=How do I...?=
An alternative is to run the script from outside Octave by calling Octave from your operating system shell. Unlike calling the script from inside Octave, this also allows you to pass arguments from the shell into the script, which the script can access using the {{manual|argv}} command:


==How do I erase a figure?==
  $ octave the-script.m arg1 arg2


closeplot();
In a Unix environment, if the script has a [http://en.wikipedia.org/wiki/Shebang_%28Unix%29 shebang] (e.g. <code>#!/usr/bin/octave</code>) and executable permissions, you can call it like any other Unix program with arguments:
closefig(number)


==How do I set the number of displayed decimals?==
  $ ./the-script arg1 arg2


    octave:1> format long
If you call the script from the shell and it's plotting, please note [[#When I try plotting from a script, why am I not seeing anything?|how to plot when running a script from the shell]].
    octave:2> pi
    pi = 3.14159265358979
    octave:3> format short
    octave:4> pi
    pi = 3.1416


==How do I vary the line thickness?==
==How do I close a figure?==  


* There's plpot_octave, but the one in debian doesn't work for me.
To close the current figure type {{manual|close}} in the Octave command prompt.
* Here's my octave hack for it--- http://gnufans.net/~deego/pub/octave/plot_width.m This one simply draws the line multiple times.
* You can edit the .eps file manually or using sed and awk.
* Export the graph as fig file (gset term fig thickness 2). This also allows for easy postediting with xfig and export to formats not supported by gnuplot.
* The gplot command of octave does not support gnuplot's linewidth parameter Thus you must use the graw() function for sending this option directly to gnuplot, eg.
graw('replot "" notitle with lines lw 4\n');
*Search the [http://octave.1599824.n4.nabble.com/ octave archives] for more.


==How do I call an octave function from C++?==
==How do I set the number of displayed decimals?==


*Here is an untested code snippet for calling rand([9000,1]), modified from a post by HerberFarnsworth? to help-octave on 2003-05-01:
You can control the number of displayed decimals using the {{manual|format}} command:


#include <octave/oct.h>
<syntaxhighlight lang="octave">
...
>> format long
ColumnVector NumRands(2);
>> pi
NumRands(0) = 9000;
pi = 3.14159265358979
NumRands(1) = 1;
>> format short
octave_value_list f_arg, f_ret;
>> pi
f_arg(0) = octave_value(NumRands);
pi = 3.1416
f_ret = feval("rand",f_arg,1);
</syntaxhighlight>
Matrix unis(f_ret(0).matrix_value());


==How do I create a full semilog/log grid==
==How do I call an Octave function from C++?==


gset grid mxtics mytics
Please read the manual https://www.gnu.org/software/octave/doc/interpreter/Calling-Octave-Functions-from-Oct_002dFiles.html.
gset grid lw 2, lw 0.1
grid("on");


One can use postscript enhancement for proper axis
==How do I change color/line definition in gnuplot postscript?==
gset format x "10^{%%L}"
or
gset format y "10^{%%L}"


==How do I change colour/line definition in gnuplot postscript?==
Here is a awk script to get a rainbow color map
Here is a awk script to get a rainbow colour map


  #!/bin/awk -f
  #!/bin/awk -f
Line 393: Line 404:
==How do I tell if a file exists?==
==How do I tell if a file exists?==


Look at functions like exist, file_in_path.. and the other functions that their descriptions point to.
One can use the function {{manual|exist}} to tell if a regular file, say <code>foo.txt</code> exist in Octave's load path, or the current directory:


<syntaxhighlight lang="octave">
>> exist ("foo.txt", "file")  # 2, if file exists, 0 otherwise
ans = 2
</syntaxhighlight>


==How do I create a plot without a window popping up (ie, a plot to a file)?==
==How do I create a plot without a window popping up (plot to a file directly)?==


  figure(1, "visible", "off");
<syntaxhighlight lang="octave">
  plot(sin(1:100));
figure (1, "visible", "off");
  print -deps "/tmp/sin.eps"
plot (sin (1:100));
print -deps "/tmp/sin.eps"
</syntaxhighlight>


One can set that behaviour as default:
One can set that behavior as default:


  set(0, 'defaultfigurevisible', 'off');
<syntaxhighlight lang="octave">
set (0, "defaultfigurevisible", "off");
</syntaxhighlight>


==How do I increase Octave's precision?==


=Common problems=
Octave's default numerical type is [https://en.wikipedia.org/wiki/IEEE_754 IEEE 754] binary64, a.k.a. "double" or "hardware floats".  This type has a precision of 53 bits or about 16 decimal digits. It is supported by each modern computer hardware, so it is really '''fast'''.  This type is assumed throughout for Octave's calculations.  If more precision was required, one can obtain a "few bits more" by using integer types, e.g. {{manual|uint64}}, but in general one cannot expect more precision from any '''fast''' numerical software.  Just to visualize "how big" those numerical limits are, consider the following table:


==How do I get sound output in Windows?==
{| class="wikitable"
See http://www.octave.org/octave-lists/archive/help-octave.2003/msg01567.html for a start.
|+ Limits of some of Octave's data types obtained by {{manual|intmax}} and {{manual|flintmax}}.
|-
| <code>intmax ("uint64")</code>
| style="text-align: right;" | <code>18,446,744,073,709,551,615</code>
| <code>2^64-1</code>
|-
| <code>intmax ("int64")</code>
| style="text-align: right;" | <code>9,223,372,036,854,775,807</code>
| <code>2^63-1</code>
|-
| <code>flintmax ("double")</code>
| style="text-align: right;" | <code>9,007,199,254,740,992</code>
| <code>2^53</code>
|-
| <code>flintmax ("single")</code>
| style="text-align: right;" | <code>16,777,216</code>
| <code>2^24</code>
|}


==Why does Octave segfault when using "clear all;"?==
When working with other types than "double" in Octave, one has to make sure, that the first operand is converted to the desired type:


This is a known problem if you have one of the following packages loaded:
<syntaxhighlight lang="Octave">
>> uint64 (2^53 + 1)
ans = 9007199254740992
>> uint64 (2^53) + 1
ans = 9007199254740993
</syntaxhighlight>


* ann
Notice the difference, in the first line the addition within the brackets is performed using double precision, therefore the result gets "truncated" to the maximum possible value without a warning.  The third line uses throughout uint64 precision.
* database
* ftp


See http://www.nabble.com/Segmentation-Fault---Clear-all-td21998563.html for a discussion
Consider carefully if your problem really needs more precision.  Often if you're running out of precision the problem lies fundamentally in your methods being [https://en.wikipedia.org/wiki/Numerical_stability numerically unstable], thus more precision will not help you here.


==Octave takes a long time to find symbols.==
If you absolutely must have more precision, you're at present better off using a [https://en.wikipedia.org/wiki/Computer_algebra_system CAS] instead of Octave.  However, CAS or symbolic computations must be implemented '''in software''' which makes it much slower than hardware floats.  An example of such a CAS is [http://www.sagemath.org/ Sage] or have a look at Octave's [[Symbolic package]].


Octave uses the genpath function to recursively add directories to the list of directories searched for function files. Check the list of directories with the path command. If the path list is very long check your use of the genpath function.
==How do I run a Matlab P-file in Octave?==


==When plotting Octave occasionally gives me errors like <tt>gnuplot> 9 0.735604 line 26317: invalid command</tt>.==
You can't. Matlab P-files (files with a <code>.p</code> file extension), also known as P-code, are [https://en.wikipedia.org/wiki/Obfuscation_%28software%29 obfuscated] files that cannot be run outside of Matlab itself. The original source Matlab m-files that were used to generate these P-files should be used in Octave instead.
There is a known bug in gnuplot 4.2 that can cause an off by one error while piping data to gnuplot. It has been fixed in gnuplot 4.4.


If you have obtained your copy of Octave from a distribution please file a bug report requesting that the fix reported in the above bug report be included.
There are no plans to support running P-files produced by Matlab in Octave.


==I cannot install a package. Octave complains about a missing mkoctfile.==
==How does Octave solve linear systems?==
 
Most distributions split Octave into several packages. The script mkoctfile is then part of a separate package:
 
* Debian/Ubuntu<br/>
  <tt>aptitude install octave-headers</tt>
 
* Fedora<br/>
  <tt>yum install octave-devel</tt>
 
=Porting programs from Matlab to Octave=
 
People often ask
 
<blockquote>
I wrote some code for Matlab, and I want to get it running under Octave. Is there anything I should watch out for?
</blockquote>
 
or alternatively
 
<blockquote>
I wrote some code in Octave, and want to share it with Matlab users. Is there anything I should watch out for?
</blockquote>
 
which is not quite the same thing. There are still a number of differences between Octave and Matlab, however in general differences between the two are considered as bugs. Octave might consider that the bug is in Matlab and do nothing about it, but generally functionality is almost identical. If you find a difference between Octave behavior and Matlab, then you should send a description of this difference (with code illustrating the difference, if possible) to http://bugs.octave.org.
 
Furthermore, Octave adds a few syntactical extensions to Matlab that might cause some issues when exchanging files between Matlab and Octave users. As both Octave and Matlab are under constant development the information in this section is subject to change at anytime.
 
You should also look at the page http://octave.sourceforge.net/packages.html and http://octave.sourceforge.net/doc/ that has a function reference that is up to date. You can use this function reference to see the number of octave function that are available and their Matlab compatibility.
 
==How is Octave different from Matlab?==
 
The major differences between Octave 3.4.N and Matlab R2010b are:
 
===Nested Functions===
Octave has limited support for nested functions. That is
 
          function y = foo (x)
            y = bar(x)
            function y = bar (x)
              y = ...;
            end
          end
 
is equivalent to
 
          function y = foo (x)
            y = bar(x)
          end
          function y = bar (x)
            y = ...;
          end
 
The main difference with Matlab is a matter of scope. While nested functions have access to the parent function's scope in Matlab, no such thing is available in Octave, due to how Octave essentially “un-nests” nested functions.
 
The authors of Octave consider the nested function scoping rules of Matlab to be more problems than they are worth as they introduce difficult to find bugs as inadvertently modifying a variable in a nested function that is also used in the parent is particularly easy.
 
===Differences in core syntax===
 
There a few core Matlab syntaxes that are not accepted by Octave, these being
 
* Some limitations on the use of function handles. The major difference is related to nested function scoping rules (as above) and their use with function handles.
 
* Some limitations of variable argument lists on the LHS of an expression, though the most common types are accepted.
 
* Matlab classdef object oriented programming is not yet supported, though work is underway and when development more on to Octave 3.5 this will be included in the development tree.
 
===Differences in core functions===
 
A large number of the Matlab core functions (ie those that are in the core and not a toolbox) are implemented, and certainly all of the commonly used ones. There are a few functions that aren't implemented, usually to do with specific missing Octave functionality (GUI, DLL, Java, ActiveX, DDE, web, and serial functions). Some of the core functions have limitations that aren't in the Matlab version. For example the sprandn function can not force a particular condition number for the matrix like Matlab can.
 
===Just-In-Time compiler===
 
Matlab includes a "Just-In-Time" compiler. This compiler allows the acceleration of for-loops in Matlab to almost native performance with certain restrictions. The JIT must know the return type of all functions called in the loops and so you can't include user functions in the loop of JIT optimized loops. Octave doesn't have a JIT and so to some might seem slower than Matlab. For this reason you must vectorize your code as much as possible. The MathWorks themselves have a good document discussing vectorization at http://www.mathworks.com/support/tech-notes/1100/1109.html.
 
===Compiler===
 
On a related point, there is no Octave compiler, and so you can't convert your Octave code into a binary for additional speed or distribution. There have been several aborted attempts at creating an Octave compiler. Should the JIT compiler above ever be implemented, an Octave compiler should be more feasible.
 
===Graphic Handles===
 
Up to Octave 2.9.9 there was no support for graphic handles in Octave itself. In the 3.2.N versions of Octave and beyond the support for graphics handles is converging towards full compatibility. The patch function is currently limited to 2-D patches, due to an underlying limitation in gnuplot, but the experimental OpenGL backend is starting to see an implementation of 3-D patches.
===GUI===
 
There are no Matlab compatible GUI functions yet.  This might be an issue if you intend to exchange Octave code with Matlab users. There are a number of bindings from Octave to Tcl/Tk, VTK and Zenity included in the Octave Forge project (http://octave.sourceforge.net) for example that can be used for a GUI, but these are not Matlab compatible. Work on a Matlab compatible GUI is in an alpha stage in the QtHandles project, which may form part of a future release of Octave.
 
===Simulink===
 
Octave itself includes no Simulink support. Typically the simulink models lag research and are less flexible, so shouldn't really be used in a research environment. However, some Matlab users that try to use Octave complain about this lack.
 
===MEX-Files===
 
Octave includes an API to the Matlab MEX interface. However, as MEX is an API to the internals of Matlab and the internals of Octave differ from Matlab, there is necessarily a manipulation of the data to convert from a MEX interface to the Octave equivalent. This is notable for all complex matrices, where Matlab stores complex arrays as real and imaginary parts, whereas Octave respects the C99/C++ standards of co-locating the real/imag parts in memory. Also due to the way Matlab allows access to the arrays passed through a pointer, the MEX interface might require copies of arrays (even non complex ones).
 
===Block comments===
 
Block comments denoted by <tt>#{</tt> and <tt>#}</tt>  markers (or <tt>%{</tt> and <tt>%}</tt>) are supported by Octave with some limitations. The major limitation is that block comments are not supported within [] or {}.
 
===Mat-File format===
 
There are some differences in the mat v5 file format accepted by Octave. Matlab recently introduced the "-V7.3" save option which is an HDF5 format which is particularly useful for 64-bit platforms where the standard Matlab format can not correctly save variables. Octave accepts HDF5 files, but is not yet compatible with the "-v7.3" versions produced by Matlab.
 
Although Octave can load inline function handles saved by Matlab, it can not yet save them.
 
Finally, Some multi-byte Unicode characters aren't yet treated in mat-files.
 
===Profiler===
 
Current Octave releases don't have a profiler, but there is one in the 3.5 development version, thanks to Daniel Kraft's 2011 Google Summer of Code project. It should be released with 3.6.
 
===Toolboxes===
 
Octave is a community project and so the toolboxes that exist are donated by those interested in them through the Octave Forge website (http://octave.sourceforge.net). These might be lacking in certain functionality relative to the Matlab toolboxes, and might not exactly duplicate the Matlab functionality or interface.
 
===Short-circuit <tt>&</tt> and <tt>|</tt> operators===
 
The <tt>&</tt> and <tt>|</tt> operators in Matlab short-circuit when included in an if statement and not otherwise. In Octave only the <tt>&&</tt> and <tt>||</tt> short circuit. Note that this means that
 
            if (a | b)
              ...
            end
 
and
 
            t = a | b;
            if t
              ...
            end
 
have different semantics in Matlab. This is really a Matlab bug, but there is too much code out there that relies on this behaviour to change it. Prefer the <tt>||</tt> and <tt>&&</tt> operators in <tt>if</tt> statements if possible. If you need to use code written for Matlab that depends on this buggy behaviour, you can enable it since Octave 3.4.0 with the following command:
 
            do_braindead_shortcircuit_evaluation(1)
 
Note that the difference with Matlab is also significant when either argument is a function with side effects or if the first argument is a scalar and the second argument is an empty matrix. For example, note the difference between
 
            t = 1 | [];          ## results in [], so...
            if (t) 1, end        ## in if ([]), this is false.
 
and


            if (1 | []) 1, end  ## short circuits so condition is true.
In addition to consulting Octave's source for the precise details, you can read the Octave manual for a complete high-level description of the algorithm that Octave uses to decide how to solve a particular linear system, e.g. how the backslash operator <code>A \ x</code> will be interpreted.  Sections [http://www.octave.org/doc/interpreter/Techniques-Used-for-Linear-Algebra.html Techniques Used for Linear Algebra] and [http://www.octave.org/doc/interpreter/Sparse-Linear-Algebra.html Linear Algebra on Sparse Matrices] from the manual describe this procedure.


Another case that is documented in the Matlab manuals is that
==How do I do X?==


            t = [1, 1] | [1, 2, 3];          ## error
You are probably looking for the function {{manual|lookfor}}.  This function searches the help text of all functions for a specific string and returns a list of functions.  Note that by default it will only search the first line of the help text (check <code>help lookfor</code> at the octave prompt for more).  The following example helps to find the function to calculate correlation coefficient in a matrix:
            if ([1, 1] | [1, 2, 3]) 1, end  ## OK


Also Matlab requires the operands of <tt>&&</tt> and <tt>||</tt> to be scalar values but Octave does not (it just applies the rule that for an operand to be considered true, every element of the object must be nonzero or logically true).
  >> lookfor correlation
  corr                Compute matrix of correlation coefficients.
  corrcoef            Compute a matrix of correlation coefficients.
  spearman            Compute Spearman's rank correlation coefficient RHO.


Finally, note the inconsistence of thinking of the condition of an <tt>if</tt> statement as being equivalent to <tt>all(X(:))</tt> when <tt>X</tt> is a matrix. This is true for all cases EXCEPT empty matrices:
Also, there's a high chance that the function name has a suggestive name, and so you can try auto-completion to get some hints.  For the previous example, typing <code>corr</code> at the octave prompt followed by pressing the {{key press|Tab}}-Key twice would suggest the following:


            if ([0, 1]) == if (all ([0, 1]))   ==> i.e., condition is false.
   >> corr
            if ([1, 1]) == if (all ([1, 1]))   ==>  i.e., condition is true.
   corr    corrcoef


However,
=Differences between Octave and Matlab=
:''See [[Differences between Octave and Matlab]]''.


            if ([])
=[https://en.wikipedia.org/wiki/Graphical_user_interface GUI]=


is not the same as
==Does Octave have a GUI?==


            if (all ([]))
'''Yes!''' It was officially released with Octave 4.0.0.  It was also available since version 3.8.0 as an experimental feature (use the {{Codeline|--force-gui}} option to start Octave).


because, despite the name, the <tt>all</tt> is really returning true if none of the elements of the matrix are zero, and since there are no elements, well, none of them are zero. This is an example of [http://en.wikipedia.org/wiki/Vacuous_truth vacuous truth]. But, somewhere along the line, someone decided that <tt>if ([])</tt> should be false. Mathworks probably thought it just looks wrong to have <tt>[]</tt> be true in this context even if you can use logical gymnastics to convince yourself that "all" the elements of an empty matrix are nonzero. Octave however duplicates this behavior for <tt>if</tt> statements containing empty matrices.
==Why did you create yet another GUI instead of making one that already exists better?==


===Solvers for singular, under- and over-determined matrices===
The previously existing GUIs were not part of Octave itself.  The integration within Octave was rather bad, as all of them treated Octave as a foreign black box and used pipes for communication.  This approach is bound to fail with each new version of Octave, as any fix would only be temporary.  For historical reasons and to honor the approaches, a short list of previous GUIs for Octave:


Matlab's solvers as used by the operators mldivide (\) and mrdivide (/), use a different approach than Octave's in the case of singular, under-, or over-determined matrices. In the case of a singular matrix, Matlab returns the result given by the LU decomposition, even though the underlying solver has flagged the result as erroneous. Octave has made the choice of falling back to a minimum norm solution of matrices that have been flagged as singular which arguably is a better result for these cases.
* '''QtOctave''' was a great, beautiful, and very useful tool which is now abandoned and incompatible with newer versions of Octave. We are thankful to its developers to make it free software so we could reuse large chunks of it for what is now the Octave GUI.


In the case of under- or over-determined matrices, Octave continues to use a minimum norm solution, whereas Matlab uses an approach that is equivalent to
* '''Quint''' was a project for an Octave GUI that actually tried to do it right.  Eventually [https://lists.gnu.org/archive/html/octave-maintainers/2011-07/msg00096.html it was merged into the Octave repository] and is no longer a separate project.  Also, many bits from QtOctave were reused in the GUI.


          function x = mldivide (A, b)
* '''[http://www.xoctave.com/ Xoctave]''', which is proprietary and commercial.
            [Q, R, E] = qr(A);
            x = [A \ b, E(:, 1:m) * (R(:, 1:m) \ (Q' * b))]
          end


While this approach is certainly faster and uses less memory than Octave's minimum norm approach, this approach seems to be inferior in other ways.
* '''GUI Octave''', which was proprietary and is no longer available.


A numerical question arises: how big can the null space component become, relative to the minimum-norm solution? Can it be nicely bounded, or can it be arbitrarily big? Consider this example:
=Graphics: backends and toolkits=


          m = 10;
==What are the supported graphics backends?==
          n = 10000;
          A = ones(m, n) + 1e-6 * randn(m,n);
          b = ones(m, 1) + 1e-6 * randn(m,1);
          norm(A \ b)


while Octave's minimum-norm values are around 3e-2, Matlab's results are 50-times larger. For another issue, try this code:
* [https://www.opengl.org/ OpenGL] via the graphics toolkits '''[https://www.qt.io/ qt]''' (current default) and '''[http://www.fltk.org/ fltk]'''
* [http://www.gnuplot.info/ gnuplot] via the '''gnuplot''' graphics toolkit


          m = 5;
==How do I change my graphics toolkit?==
          n = 100;
          j = floor(m * rand(1, n)) + 1;
          b = ones(m, 1);
          A = zeros(m, n);
          A(sub2ind(size(A),j,1:n)) = 1;
          x = A \ b;
          [dummy,p] = sort(rand(1,n));
          y = A(:,p)\b;
          norm(x(p)-y)


It shows that unlike in Octave, mldivide in Matlab is not invariant with respect to column permutations. If there are multiple columns of the same norm, permuting columns of the matrix gets you different result than permuting the solution vector. This will surprise many users.
There are three commands to deal with graphics toolkits:


Since the mldivide (\) and mrdivide (/) operators are often part of a more complex expression, where there is no room to react to warnings or flags, it should prefer intelligence (robustness) to speed, and so the Octave developers are firmly of the opinion that Octave's approach for singular, under- and over-determined matrices is a better choice than Matlab's.
{| class="wikitable"
| <code>available_graphics_toolkits</code>
| lists all available graphics toolkits
|-
| <code>graphics_toolkit</code>
| displays the currently used graphics toolkit
|-
| <code>graphics_toolkit ("qt/fltk/gnuplot")</code>
| sets the graphics toolkit to either of [https://www.qt.io/ qt], [http://www.fltk.org/ fltk], or [http://www.gnuplot.info/ gnuplot], if available
|}


===Octave extensions===
==Why did you replace gnuplot with an OpenGL backend?==


The extensions in Octave over Matlab syntax are very useful, but might cause issues when sharing with Matlab users. A list of the major extensions that should be avoided to be compatible with Matlab are
The development of Octave is committed to being both compatible with Matlab and adding additional features. Toward those ends, the developers decided to introduce a native OpenGL backend that supports Matlab handle graphics and its uicontrols.  Starting with the 3.8 release, Octave uses OpenGL graphics by default (with [http://www.fltk.org/ FLTK widgets] in Octave 3.8 and [https://www.qt.io/ Qt widgets] in Octave 4.0 and later).
Comments in octave can be marked with <tt>#</tt>. This allows POSIX systems to have the first line as <tt>#! octave -q</tt> and mark the script itself executable. Matlab doesn't have this feature due to the absence of comments starting with <tt>#</tt>".


Code blocks like if, for, while, etc can be terminated with block specific terminations like endif. Matlab doesn't have this and all blocks must be terminated with end.
==Are there any plans to remove the gnuplot backend?==


Octave has a lisp-like <tt>unwind_protect</tt> block that allows blocks of code that terminate in an error to ensure that the variables that are touched are restored. You can do something similar with try/catch combined with <tt>rethrow (lasterror ())</tt> in Matlab, however rethrow and lasterror are only available in Octave 2.9.10 and later. Matlab 2008a also introduced <tt>OnCleanUp</tt> that is similar to <tt>unwind_protect</tt>, except that the object created by this function has to be explicitly cleared in order for the cleanup code to run.
'''No.''' There are no plans to remove the gnuplot backend.  It will be available as long as our users find it useful.


Note that using try/catch combined with <tt>rethrow (lasterror ())</tt> can not guarantee that global variables will be correctly reset, as it won't catch user interrupts with Ctrl-C. For example
==How can I implement a new graphics backend/toolkit?==


                global a
This is one of those times where the best documentation is to read the existing code.  We have three different toolkits in Octave now, so there are some examples to draw from.
                a = 1;
                try
                  _a = a;
                  a = 2
                  while true
                  end
                catch
                  fprintf ('caught interrupt\n');
                  a = _a;
                  rethrow (lasterror());
                end


compared to
= Development =


                global a
== When will feature X be released or implemented? ==
                a = 1;
                unwind_protect
                  _a = a;
                  a = 2
                  while true
                  end
                unwind_protect_cleanup
                  fprintf ('caught interrupt\n');
                  a = _a;
                end


Typing Ctrl-C in the first case returns the user directly to the prompt, and the variable ''a'' is not reset to the saved value. In the second case the variable ''a'' is reset correctly. Therefore Matlab gives no safe way of temporarily changing global variables.
When it's ready, sooner [https://www.octave.org/get-involved.html if you help].  You can [https://savannah.gnu.org/patch/?group=octave send us patches] if you can implement feature X yourself.  If you can't, some [https://www.octave.org/commercial-support.html developers may be convinced to work on your specific problem for some money].


Indexing can be applied to all objects in Octave and not just variables. Therefore <tt>sin(x)(1:10);</tt> for example is perfectly valid in Octave but not Matlab. To do the same in Matlab you must do <tt>y = sin(x); y = y([1:10]);</tt>
== How can I get involved in Octave development? ==


Octave has the operators <tt>++</tt>, <tt>–</tt>, <tt>-=</tt>, <tt>+=</tt>, <tt>*=</tt>, etc. As Matlab doesn't, if you are sharing code these should be avoided.
:''See [[Developer FAQ]]''.


Character strings in Octave can be denoted with double or single quotes. There is a subtle difference between the two in that escaped characters like <tt>\n</tt> (newline), <tt>\t</tt> (tab), etc are interpreted in double quoted strings but not single quoted strings. This difference is important on Windows platforms where the <tt>\</tt> character is used in path names, and so single quoted strings should be used in paths. Matlab doesn't have double quoted strings and so they should be avoided if the code will be transferred to a Matlab user.
[[Category:FAQ]]

Latest revision as of 14:27, 15 June 2023

This is a list of frequently asked questions (FAQ) for GNU Octave users.

We are always looking for new questions (with answers), better answers, or both. Feel free to edit this page with your changes.

Where do I get additional help?[edit]

If you can't find an answer to your question in this FAQ, wiki, or in the manual (PDF) you can:

Support expectations[edit]

See Support Expectations

Also this CommitStrip

General[edit]

What is Octave?[edit]

GNU Octave is a high-level interpreted language, primarily intended for numerical computations. It provides capabilities for the numerical solution of linear and nonlinear problems, and for performing other numerical experiments. It also provides extensive graphics capabilities for data visualization and manipulation. GNU Octave is normally used through its interactive interface (CLI and GUI), but it can also be used to write non-interactive programs. The GNU Octave language is quite similar to Matlab so that most programs are easily portable.

The GNU Octave distribution includes a 1000+ page Texinfo manual. Access to the complete text of the manual is available via the doc command at the GNU Octave prompt.

What is Octave Forge?[edit]

Octave Forge is a collection of packages for GNU Octave, something similar to the Matlab toolboxes. When talking about the two projects at the same time, GNU Octave is usually referred to as Octave core (or just "core"). Octave Forge also serves as a test bed for code that may eventually end up in the core, and distributes binaries for systems with a lack of developers tools (mainly Windows).

Who uses Octave?[edit]

A huge number of people ranging from students to researchers involved in various fields such as statistics,Machine Learning, data analytics, etc. Universities use it for research and teaching, companies of all sizes for development and individuals for certain private purposes. See Who Uses Octave? for more clarity.

Who develops Octave?[edit]

Discussions about writing the software that would eventually become Octave started in about 1988 with James B. Rawlings and John W. Eaton at the University of Texas. John W. Eaton is the original author of Octave, starting full-time development in February 1992. He is still the primary maintainer. The community of users and developers has in addition contributed some code and fuels the discussion on the mailing lists help@octave.org (user forum), maintainers@octave.org (development issues). Since 2011, GNU Octave regularly participates in Summer of Code events as a mentor organisation. As part of those events, several students contributed to Octave by helping in removal of bugs and development of new features.

Why "Octave"?[edit]

Octave's name has nothing to do with music. It is named after Octave Levenspiel, a former professor of John who was famous for his ability to do quick back-of-the-envelope calculations. You can hear John pronounce the name "Octave" a few times in this video. We hope that GNU Octave will help perform computations with the same ease as Dr. Levenspiel.

Why "GNU" Octave?[edit]

The GNU Project was launched in 1984 to develop a complete Unix-like operating system which is free software: the GNU system. GNU is a recursive acronym for "GNU's Not Unix"; it is pronounced g'noo.

The Free Software Foundation (FSF) is the principal organization that has sponsored the GNU Project.

Octave became GNU Octave in 1997 (beginning with version 2.0.6). This meant agreeing to consider Octave a part of the GNU Project and support the efforts of the FSF. A big part of this effort is to adhere to the GNU coding standards and to benefit from GNU's infrastructure (e.g. code hosting and bug tracking). Additionally, Octave receives sponsorship from the FSF's Working Together fund. However, Octave is not and has never been developed by the FSF.

How can I cite Octave?[edit]

Octave is free software and does not legally bind you to cite it. However, we have invested a lot of time and effort in creating GNU Octave, and we would appreciate if you would cite if you used. To cite GNU Octave in publications use:

 John W. Eaton, David Bateman, Søren Hauberg, Rik Wehbring (2024).
 GNU Octave version 9.1.0 manual: a high-level interactive language for numerical computations.
 URL https://octave.org/doc/v9.1.0/

A BibTeX entry for LaTeX users is:

 @manual{,
   title     = {{GNU Octave} version 9.1.0 manual: a high-level interactive language for numerical computations},
   author    = {John W. Eaton and David Bateman and S{\o}ren Hauberg and Rik Wehbring},
   year      = {2024},
   url       = {https://octave.org/doc/v9.1.0/},
 }

Run citation at the Octave prompt for details on how to best cite the Octave version you are running. Certain Octave packages also have recommended citations in which case use citation package_name.

Note that there are two reasons for citing the software used. One is giving recognition to the work done by others which we have already addressed to. The other is giving details on the system used so that experiments can be replicated. For this, you should cite the version of Octave and all packages used (you can get this information using the ver command), as well as any details of your setup as part of your Methods. In addition, you should make your source available as well. See How to cite and describe software for more details and an in depth discussion for the same.

What documentation exists for Octave?[edit]

Besides this wiki, the GNU Octave distribution includes a 1000+ page Texinfo manual (PDF). Access to the complete text of the manual is available via the doc command at the GNU Octave prompt. If you have problems using this manual, or find that some topic is not adequately explained, indexed, or cross-referenced, please report it on http://bugs.octave.org.

How can I report a bug in Octave?[edit]

Please read our website http://www.octave.org/bugs.html.


Common problems[edit]

Octave does not start[edit]

The following steps have been the solution to several bug reports and help requests. Please try them before asking for further support. If nothing below helps, please give us the following information:

MS Windows[edit]

  • After Octave upgrade the GUI does not open / shuts down immediately.
    • Solution:
      • Version 5.2.0 and older: Delete the folder C:\Users\YOUR_USER_NAME\.config\octave
      • Version 6.1.0 and newer: Delete the folder %APPDATA%\octave, which generally is located at C:\Users\YOUR_USER_NAME\AppData\Roaming\octave
  • Missing/conflicting files.
    • Solution: Remove/Uninstall all existing Octave versions. Restart the system. Install GNU Octave again.
  • Permission errors
    • Solution 1: Octave versions prior to version 7.1.0 on MS Windows used VBS scripts to start the program. You can test whether your system is blocking VBS scripts by doing the following:
      1. Using Notepad or another text editor, create a text file containing only the text:
        msgbox("This is a test script, Click OK to close")
      2. Save the file on your Desktop with the name testscript.vbs (be sure that the editor didn't end it in .txt or .vbs.txt).
      3. Double click the file. If scripts can run, a popup window will appear with that message.
        • If the file opens in notepad or an editor, it means it still ended in .txt. MS Windows insecurely hides file extensions by default. To show file extensions follow these instructions at Microsoft.com.
        • If both testscript.vbs and octave.vbs open a text- or other editor, it means your MS Windows file associations have .vbs files associated with another program. To fix this, right click the .vbs file, select "Open With", select "Choose Another App", check the box that says "Always use this app to open .vbs files". Finally, select "Microsoft Windows Based Script Host" from the list. If it is not in the list, select "More apps". If still not there, select "Look for Another App on this PC" and navigate to C:\Windows\System32\wscript.exe, select it, and select "Open". If wscript is still not present you will need to seek assistance installing missing MS Windows components.
      4. Try moving testscript.vbs to another location, such as a C:\temp folder. Additionally try to move testscript.vbs in the Octave installation folder containing octave.vbs and see if VBS scripts can be run there.
      5. If testscript.vbs doesn't run in any of those locations, then scripting appears to be disabled or blocked on your system. If testscript.vbs runs in some locations but not others, there there may be other security permissions errors to be solved. If testscript.vbs runs in the same folder as octave.vbs, but directly double-clicking on octave.vbs does not start Octave, then there appears to be some problem other than script permissions.
    • Solution 2: Consult your malware detection (a.k.a. AntiVirus) software, if files are blocked.
    • Solution 3: Did you install Octave on a network-drive? Do you have the execution permissions?
    • Solution 4: Is your computer managed by your company? Does your administrator prohibit script execution?

Collecting gdb backtrace information[edit]

The following instructions can help you gather troubleshooting information that may help developers identify the problem if the above steps are ineffective:

  • if Octave is 'hanging' (the process is remaining open):
    1. attempt to start the Octave GUI
    2. with the program stalled (either at the GUI, or with the black terminal window), open the Task Manager (right click on taskbar, select Task manager), switch to the "Details" tab, find `octave-gui.exe` on that list, ad take note of the corresponding PID (process ID)
    3. Open the folder where Octave is installed. You should find a file called `cmdshell.bat` in the main folder. Run that file, which should open a MSYS2 bash (command line) window.
    4. At that prompt, run `gdb -p PID` where PID is the process ID noted previously.
    5. at the gdb prompt, execute `set logging on` to save all output to a text file (default will be `gdb.txt`. If you want a different location or filename you can execute `set logging file C:\path\to\file.txt` first).
    6. execute `thread apply all bt`. (If this returns a list longer than one page you may need to 'continue' by typing `c`.)
    7. execute `quit` to leave gdb.
    8. append that text file to your trouble report at octave.discourse.group or bug report at bugs.octave.org.
  • if Octave is immediately crashing and closing:
    1. Open the folder where Octave is installed. You should find a file called `cmdshell.bat` in the main folder. Run that file, which should open a MSYS2 bash (command line) window.
    2. At that prompt, run `gdb octave`. (that will start gdb attached to the octave executable.)
    3. at the gdb prompt, execute `set logging on` to save all output to a text file (default will be `gdb.txt`. If you want a different location or filename you can execute `set logging file C:\path\to\file.txt` first).
    4. At the gdb prompt, execute `r --gui`. That should attempt to start the Octave in GUI mode. The gdb prompt should stay unresponsive as long as octave is running.
    5. If octave crashes, the gdb prompt should become responsive again. execute `thread apply all bt`. (If this returns a list longer than one page you may need to 'continue' by typing `c`.)
    6. append the text file to your trouble report at octave.discourse.group or bug report at bugs.octave.org.

I do not see any output of my script until it has finished?[edit]

By default Octave is set to pass its screen output through a pager (usually the default pager is "less") which allows things such as navigating through the output with arrow keys or searching for text or regular expressions within the output. The pager only displays the output after it's finished receiving it, so when it is active you'll not be able to see anything until your script has terminated. To change this behavior temporarily or permanently you may want to use one of the options described in the manual.

When I try plotting from a script, why am I not seeing anything?[edit]

If you are running an Octave script that includes a plotting command, the script and Octave may terminate immediately. So the plot window does show up, but immediately closes when Octave finishes execution. Alternatively, if using fltk, the plot window needs a readline loop to show up (the time when Octave is sitting around doing nothing waiting for interactive input).

A common solution is to put a pause command at the end of your script.

How do I get sound input or output in MS Windows?[edit]

Sound input from a sound card and output to a sound card is fully supported since Octave 4.0.0 for all platforms. If you have problems with the audio I/O functions using Octave 4.0.0 or a newer version, please report them on the bug tracker.

I have problem X using the latest Octave version[edit]

Please be more specific about what you mean by "latest version"?

  • The latest stable version is 9.1.0. Be aware that you may still have an older version due to whatever distribution method you are using. To get a newer stable version for your system see the following as in accordance to your Operating system: GNU/Linux, macOS, or Windows.
  • If you refer to the latest Mercurial revision, please specify the changeset ID not the revision number, e.g. the output of hg summary or hg id. Changeset IDs are globally unique across all repos.

If your problem still persists with the "latest version", then please report a bug or ask for help at help@octave.org. Otherwise, don't be surprised if volunteers are less inclined to help you with a problem that only exists in an older version of Octave and is already fixed in a newer version.

Why is Octave's floating-point computation wrong?[edit]

Floating-point arithmetic is an approximation in binary to arithmetic on real or complex numbers. Just like you cannot represent 1/3 exactly in decimal arithmetic (0.333333... is only a rough approximation to 1/3 for any finite number of 3s), you cannot represent some fractions like exactly in base 2. In binary, the representation to one tenth is where the bar indicates that it repeats infinitely (like how in decimal). Because this infinite repetition cannot be represented exactly with a finite number of digits, rounding errors occur for values that appear to be exact in decimal but are in fact approximations in binary, such as for example how 0.3 - 0.2 - 0.1 is not equal to zero.

In addition, some advanced operations are computed by approximation and there is no guarantee for them to be accurate, see Table-maker's dilemma for further references. Their results are system-dependent.

This isn't a bug that is limited to GNU-Octave & it happens with any program that uses IEEE 754 floating-point arithmetic. To be fair, IEEE 754 also specifies decimal floating-point arithmetic, which has never seen wide adoption. The reason why Octave and other programs using IEEE 754 binary floating-point numbers is that they are fast, because they are implemented in hardware or system libraries. Unless you are using very exotic hardware, Octave will use your computer's processor for basic floating-point arithmetic.

Another approach to deal with rounding errors is interval arithmetic with the Interval package or symbolic computations with the Symbolic package. These approaches are likely to be slower, since not all operations can be performed on Hardware like pure floating-point arithmetic.

To learn more about floating-point arithmetic, consult this Wikipedia article or the classical reference by David Goldberg What Every Computer Scientist Should Know About Floating-Point Arithmetic.

Missing lines when printing under Windows with OpenGL toolkit and Intel integrated GPU[edit]

Some windows users with integrated Intel GPUs have reported missing lines when printing with an OpenGL toolkit like FLTK or Qt. #42534

Users with this kind of problem should try to install/update their Intel OpenGL drivers for Windows or consider installing Mesa drivers from http://qt-project.org/wiki/Cross-compiling-Mesa-for-Windows.

See also https://www.opengl.org/wiki/FAQ#Why_is_my_GL_version_only_1.4_or_lower.3F .

Plot hangs and makes the GUI unresponsive[edit]

If the Qt graphics toolkit is used and "plot" is used for the first time, the fontconfig scanner searches the font directory to build a font cache. This can take up to 3min on slow CPUs. See #45458

Error message about invalid call to script or invalid use of script in index expression[edit]

If Octave shows an error message about invalid call to script .../close.m or invalid use of of script .../close.m in index expression, it means that you have created a script called close.m that is overriding the built-in Octave function close. Octave functions and scripts share the same global namespace. It is best to avoid creating your own scripts or functions that have the same name as an Octave function as to avoid this error regarding the invalid call to script or invalid use of script in index expression.

Licensing issues[edit]

If I write code using Octave do I have to release it under the GPL?[edit]

The answer depends on precisely how the code is written and how it works:

  • Code written entirely in the scripting language of Octave (interpreted code in .m files) may be released under the terms of whatever license you choose.
  • Code written using Octave's native code interface (also known as a .oct file) necessarily links with Octave internals and is considered a derivative work of Octave. Therefore it must be released under terms that are compatible with the GPL.
  1. The MEX file may not use any bindings that are specific to Octave, it has to use the MEX interface only. In other words, it should be possible in principle to use the MEX file with other programs that implement the MEX interface (e.g., Matlab). For example including an Octave header file or calling an Octave function within the MEX file, that is not related with Octave's implementation of the MEX interface make the MEX file a derivative work of Octave and has therefore to be released under terms that are compatible with the GPL.
  2. The MEX file may not be distributed together with Octave in such a way that they effectively create a single work. For example, you should not distribute the MEX file and Octave together in a single package such that Octave automatically loads and runs the MEX file when it starts up. There are other possible ways to effectively create a single work.
  • Code that embeds the Octave interpreter (e.g., by calling the octave_main function), or that calls functions from Octave's libraries (e.g., liboctinterp, liboctave, or libcruft) is considered a derivative work of Octave and therefore must be released under terms that are compatible with the GPL.

Will you change the license of the Octave libraries for me?[edit]

No. Instead of asking us to change the licensing terms for Octave, we recommend that you release your program under terms that are compatible with the GPL, this way the free software community can be benefited from your work the same as you were/have benefited from the work of all the people who have contributed to Octave.

Should I favor the MEX interface to avoid the GPL?[edit]

No. The original reason for implementing the MEX interface for Octave was to allow Octave to run free software that uses MEX files (the particular goal was to run sundialsTB in Octave). The intent was to liberate that software from Matlab and increase the amount of free softwares available to Octave users & not to enable people to write proprietary code for Octave. For the good of the community, we strongly encourage users of Octave to release the code they write for Octave under terms that are compatible with the GPL.

Why can't I use code from File Exchange in Octave?[edit]

According to the Matlab Central Terms of Use (Last updated: 10-Aug-2016), all submitted code is licensed under the BSD license by default (cf. § 5 Terms of Use), but it is clearly stated that:

Content submitted to File Exchange may only be used with MathWorks products.
—§ 2(a)(iii) Terms of Use

That does not apply to GNU Octave, therefore the usage is in general prohibited. It should suffice — although interpretations of this vary — to contact the author directly to send you the code personally (maybe released under a free license), or download the code from the author's own website, if available. Some examples of letters/email sent to authors for that purpose.

Installation[edit]

How can I install Octave on Windows?[edit]

So as to install GNU-Octave for Windows O.S, refer to : Octave for Microsoft Windows

How can I install Octave on MacOS?[edit]

So as to install GNU-Octave for MacOS, refer to : Octave for macOS

How can I install Octave on GNU/Linux?[edit]

So as to install GNU-Octave on GNU/Linux, refer to: Octave for GNU/Linux

How to install Octave on Android OR What is the Octave app available in the Google Play store?[edit]

There is an unofficial Octave app available for Android in the Google Play store. Please see Octave for Android for further information.

How can I install Octave on platform X?[edit]

Octave currently runs on GNU/Linux, macOS, and Windows. It should be possible to make Octave work on other systems as well. If you are interested in porting Octave to other systems, please contact the maintainers development mailing list maintainers@octave.org.

What Octave version should I use?[edit]

For general use, it is recommended to use the latest stable version of Octave (currently 9.1.0), available from http://www.octave.org/download.html. For development and bleeding-edge features one can obtain the development source code from the Mercurial repository https://hg.savannah.gnu.org/hgweb/octave/graph/.

The used version of Octave is available via the ver command and a list of user-visible changes since the last release is available via the news command at the GNU Octave prompt.

On what platforms does Octave run?[edit]

Octave runs on any platform you can compile it on. Binary distributions exist for GNU/Linux, macOS, and Windows. To work fully functional, Octave requires the used platform to support the underlying numerical libraries like BLAS, LAPACK, SuiteSparse, etc., and for plotting OpenGL or gnuplot.

How can I obtain Octave's source code?[edit]

The latest version of the Octave source code (and older versions) is available from:

Since Octave is distributed under the terms of the GPL, you can get Octave from a friend who has a copy.

How can I build Octave from the source code?[edit]

To use Octave it is usually not required to build it from it's source code. Binary distributions exist for GNU/Linux, macOS, and Windows.

If you have reasons to build Octave from the source code, see Building for more information.

What do I need to build Octave from the source code?[edit]

For a list of build dependencies, refer to Building.

Do I need GCC to build Octave from the source code?[edit]

No. The development is done primarily with GCC, so you may hit some incompatibilities. Octave is intended to be portable to any standard conforming compiler (for example clang is known to work as well). If you face any difficulties that you think are bugs, please report them to the bug tracker, or ask for help on the help@octave.org mailing list.

What's new in Octave?[edit]

Each new Octave release introduces many new features. A complete list of user visible changes can be seen by running news at the Octave prompt.

  • What's new in the next version of Octave?
  • What was new in Octave Version X.Y.Z?

Packages and Octave Forge[edit]

How do I install or load all Octave Forge packages?[edit]

Do not do it! Really, there is no reason to do this. Octave has many packages for different needs and is unlikely that you need all of them. You either have a small set of required packages, in which case you know them by name; or you want them all "just because", in which case you don't really need them.

The common misconception is that the more packages one has installed and loaded, the more complete and powerful its Octave installation will be. However, in the same way one would never install all perl modules, ruby gems, python packages, and C++ libraries (because it simply makes no sense), one should not install all Octave packages.

Packages should be installed and loaded selectively. Note that some packages are meant to shadow core functions changing the way Octave works, and that different packages can have different functions with the same name leading to unpredictable results.

If you really really really want to do load all packages, you can with the following:

## WARNING: loading all packages is probably not the solution you are looking for.
cellfun (@(x) pkg ("load", x.name), pkg ("list"));

I have installed a package but still get a "foo undefined" error?[edit]

You have probably forgotten to load the package. Use pkg load package-name to load it. Most packages are no longer loaded automatically to avoid surprises. See reasoning on related FAQ how do I install all Octave packages. If you want a specific package to be loaded by default at startup, consider adding the pkg load command on your .octaverc file.

I cannot install a package. Octave complains about a missing mkoctfile.[edit]

You should normally use your distribution's packages. For Debian and Fedora, Octave package foo will be a deb or rpm called octave-foo, and you should install that instead using apt or yum.

If you really need to build Octave packages from source to install them, you'll need mkoctfile. Most distributions split Octave into several packages. The script mkoctfile is then part of a separate package:

  • Fedora: octave-devel

How do I automatically load a package at Octave startup?[edit]

When Octave starts, it runs the file ~/.octaverc (in your user's home directory). If you want Octave to automatically load a package, simply add a pkg load pkg-name command to it. If the files does not exist, create it.

If you do this, remember that other people may not have Octave configured to load packages at startup. Therefore, if you write code for others, remember that your programs still need to load the packages they require.

Octave usage[edit]

How do I execute an Octave script?[edit]

First of all, make sure you understand the difference between script files and function files. If you want to execute a function defined in a file, just call the function like any other Octave function: foo(arg1, arg2);

To execute a script from within Octave, just type its name without the .m extension. Thus, if you have a script called foo.m, just type foo from within the Octave command prompt to execute it. You have to make sure that the script is in your current working directory or in Octave's load path. Type pwd to get the current working directory or type path to see which paths belong to Octave's load path. The current working directory is referred to as "." in the output of path.

If the script name has characters that are not valid for an Octave identifier, or if you do not want to use addpath to add the script's location to the current path, you can use the run function instead:

run ("Script Name With Spaces.m")
run ("/opt/local/foo.m")

An alternative is to run the script from outside Octave by calling Octave from your operating system shell. Unlike calling the script from inside Octave, this also allows you to pass arguments from the shell into the script, which the script can access using the argv command:

  $ octave the-script.m arg1 arg2

In a Unix environment, if the script has a shebang (e.g. #!/usr/bin/octave) and executable permissions, you can call it like any other Unix program with arguments:

  $ ./the-script arg1 arg2

If you call the script from the shell and it's plotting, please note how to plot when running a script from the shell.

How do I close a figure?[edit]

To close the current figure type close in the Octave command prompt.

How do I set the number of displayed decimals?[edit]

You can control the number of displayed decimals using the format command:

>> format long
>> pi
pi = 3.14159265358979
>> format short
>> pi
pi = 3.1416

How do I call an Octave function from C++?[edit]

Please read the manual https://www.gnu.org/software/octave/doc/interpreter/Calling-Octave-Functions-from-Oct_002dFiles.html.

How do I change color/line definition in gnuplot postscript?[edit]

Here is a awk script to get a rainbow color map

#!/bin/awk -f
 
 BEGIN {
   split("0 4 6 7 5 3 1 2 8", rainbow, " ");
   split("7 3 1 0 2 4 6 5 8", invraim, " ");
 }
 
 $1 ~ /\/LT[0-8]/ {
   n = substr($1, 4, 1);
   if (n == 0)
     lt = "{ PL [] 0.9 0.1 0.1 DL } def";
   else if (n == 1)
     lt = "{ PL [4 dl 2 dl] 0.1 .75 0.1 DL } def";
   else if (n == 2)
     lt = "{ PL [2 dl 3 dl] 0.1 0.1 0.9 DL } def";
   else if (n == 3)
     lt = "{ PL [1 dl 1.5 dl] 0.9 0 0.8 DL } def";
   else if (n == 4)
     lt = "{ PL [5 dl 2 dl 1 dl 2 dl] 0.1 0.8 0.8 DL } def";
   else if (n == 5)
     lt = "{ PL [4 dl 3 dl 1 dl 3 dl] 0.9 0.8 0.2 DL } def";
   else if (n == 6)
     lt = "{ PL [2 dl 2 dl 2 dl 4 dl] 0.5 0.3 0.1 DL } def";
   else if (n == 7)
     lt = "{ PL [2 dl 2 dl 2 dl 2 dl 2 dl 4 dl] 1 0.4 0 DL } def";
   else if (n == 8)
     lt = "{ PL [2 dl 2 dl 2 dl 2 dl 2 dl 2 dl 2 dl 4 dl] 0.5 0.5 0.5 DL } def";
   $0 = sprintf("/LT%d %s", rainbow[n+1], lt);
   ##$0 = sprintf("/LT%x %s", invraim[n+1], lt);
   ##$0 = sprintf("/LT%x %s", n, lt);
 }
 
 { print; }

How do I tell if a file exists?[edit]

One can use the function exist to tell if a regular file, say foo.txt exist in Octave's load path, or the current directory:

>> exist ("foo.txt", "file")  # 2, if file exists, 0 otherwise
ans = 2

How do I create a plot without a window popping up (plot to a file directly)?[edit]

figure (1, "visible", "off");
plot (sin (1:100));
print -deps "/tmp/sin.eps"

One can set that behavior as default:

set (0, "defaultfigurevisible", "off");

How do I increase Octave's precision?[edit]

Octave's default numerical type is IEEE 754 binary64, a.k.a. "double" or "hardware floats". This type has a precision of 53 bits or about 16 decimal digits. It is supported by each modern computer hardware, so it is really fast. This type is assumed throughout for Octave's calculations. If more precision was required, one can obtain a "few bits more" by using integer types, e.g. uint64, but in general one cannot expect more precision from any fast numerical software. Just to visualize "how big" those numerical limits are, consider the following table:

Limits of some of Octave's data types obtained by intmax and flintmax.
intmax ("uint64") 18,446,744,073,709,551,615 2^64-1
intmax ("int64") 9,223,372,036,854,775,807 2^63-1
flintmax ("double") 9,007,199,254,740,992 2^53
flintmax ("single") 16,777,216 2^24

When working with other types than "double" in Octave, one has to make sure, that the first operand is converted to the desired type:

>> uint64 (2^53 + 1)
ans = 9007199254740992
>> uint64 (2^53) + 1
ans = 9007199254740993

Notice the difference, in the first line the addition within the brackets is performed using double precision, therefore the result gets "truncated" to the maximum possible value without a warning. The third line uses throughout uint64 precision.

Consider carefully if your problem really needs more precision. Often if you're running out of precision the problem lies fundamentally in your methods being numerically unstable, thus more precision will not help you here.

If you absolutely must have more precision, you're at present better off using a CAS instead of Octave. However, CAS or symbolic computations must be implemented in software which makes it much slower than hardware floats. An example of such a CAS is Sage or have a look at Octave's Symbolic package.

How do I run a Matlab P-file in Octave?[edit]

You can't. Matlab P-files (files with a .p file extension), also known as P-code, are obfuscated files that cannot be run outside of Matlab itself. The original source Matlab m-files that were used to generate these P-files should be used in Octave instead.

There are no plans to support running P-files produced by Matlab in Octave.

How does Octave solve linear systems?[edit]

In addition to consulting Octave's source for the precise details, you can read the Octave manual for a complete high-level description of the algorithm that Octave uses to decide how to solve a particular linear system, e.g. how the backslash operator A \ x will be interpreted. Sections Techniques Used for Linear Algebra and Linear Algebra on Sparse Matrices from the manual describe this procedure.

How do I do X?[edit]

You are probably looking for the function lookfor. This function searches the help text of all functions for a specific string and returns a list of functions. Note that by default it will only search the first line of the help text (check help lookfor at the octave prompt for more). The following example helps to find the function to calculate correlation coefficient in a matrix:

 >> lookfor correlation
 corr                Compute matrix of correlation coefficients.
 corrcoef            Compute a matrix of correlation coefficients.
 spearman            Compute Spearman's rank correlation coefficient RHO.

Also, there's a high chance that the function name has a suggestive name, and so you can try auto-completion to get some hints. For the previous example, typing corr at the octave prompt followed by pressing the Tab ↹-Key twice would suggest the following:

 >> corr
 corr     corrcoef

Differences between Octave and Matlab

See Differences between Octave and Matlab.

GUI[edit]

Does Octave have a GUI?[edit]

Yes! It was officially released with Octave 4.0.0. It was also available since version 3.8.0 as an experimental feature (use the --force-gui option to start Octave).

Why did you create yet another GUI instead of making one that already exists better?[edit]

The previously existing GUIs were not part of Octave itself. The integration within Octave was rather bad, as all of them treated Octave as a foreign black box and used pipes for communication. This approach is bound to fail with each new version of Octave, as any fix would only be temporary. For historical reasons and to honor the approaches, a short list of previous GUIs for Octave:

  • QtOctave was a great, beautiful, and very useful tool which is now abandoned and incompatible with newer versions of Octave. We are thankful to its developers to make it free software so we could reuse large chunks of it for what is now the Octave GUI.
  • Quint was a project for an Octave GUI that actually tried to do it right. Eventually it was merged into the Octave repository and is no longer a separate project. Also, many bits from QtOctave were reused in the GUI.
  • Xoctave, which is proprietary and commercial.
  • GUI Octave, which was proprietary and is no longer available.

Graphics: backends and toolkits[edit]

What are the supported graphics backends?[edit]

  • OpenGL via the graphics toolkits qt (current default) and fltk
  • gnuplot via the gnuplot graphics toolkit

How do I change my graphics toolkit?[edit]

There are three commands to deal with graphics toolkits:

available_graphics_toolkits lists all available graphics toolkits
graphics_toolkit displays the currently used graphics toolkit
graphics_toolkit ("qt/fltk/gnuplot") sets the graphics toolkit to either of qt, fltk, or gnuplot, if available

Why did you replace gnuplot with an OpenGL backend?[edit]

The development of Octave is committed to being both compatible with Matlab and adding additional features. Toward those ends, the developers decided to introduce a native OpenGL backend that supports Matlab handle graphics and its uicontrols. Starting with the 3.8 release, Octave uses OpenGL graphics by default (with FLTK widgets in Octave 3.8 and Qt widgets in Octave 4.0 and later).

Are there any plans to remove the gnuplot backend?[edit]

No. There are no plans to remove the gnuplot backend. It will be available as long as our users find it useful.

How can I implement a new graphics backend/toolkit?[edit]

This is one of those times where the best documentation is to read the existing code. We have three different toolkits in Octave now, so there are some examples to draw from.

Development

When will feature X be released or implemented?[edit]

When it's ready, sooner if you help. You can send us patches if you can implement feature X yourself. If you can't, some developers may be convinced to work on your specific problem for some money.

How can I get involved in Octave development?[edit]

See Developer FAQ.