Prototype MacPorts PortFile
Jump to navigation
Jump to search
This page is outdated (June 2020). For more recent information, see Octave for macOS.
This prototype MacPorts portfile is intended to be used to produce a Octave App bundle for MacOS X. Before using it, please verify that the version number of Octave is correct. If a change is made to the file, it is recommended that the revision number be incremented to ensure that MacPorts recognizes that the port is outdated and in need of being upgraded.
This portfile deviates significantly from the Octave portfile provided by MacPorts. Specifically, this portfile has fltk-devel, epstool, pstoedit, and transfig as required dependencies. In addition, METIS has been removed, as it's license is not compatible with GPL. Since the transfig port ultimately includes xord-libx11 which triggers an error during the port mdmg the transfig port has also been removed.
# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:et:sw=4:ts=4:sts=4
# $Id: Portfile 106065 2013-05-14 09:28:04Z ryandesign@macports.org $
PortSystem 1.0
name octave-local
version 3.6.4
revision 3
conflicts octave, octave-devel
categories math science
maintainers michaelld openmaintainer
license GPL-3
platforms darwin
description a Matlab-like environment for numerical analysis
long_description Octave provides a convenient command line interface \
for solving linear and nonlinear problems numerically, \
using a language that is mostly compatible with Matlab. \
It is easily extensible and customizable via \
user-defined functions or using dynamically loaded \
modules written in e.g. C++, C or Fortran.
homepage http://www.gnu.org/software/octave/
master_sites gnu:octave
dist_subdir octave
distname octave-${version}
use_bzip2 yes
checksums rmd160 b0356f0c5d9366b8129d72ac58bbde837fee1a95 \
sha256 fa185df9591f5d740f4d37ff6eaf06db576fdd3e0ddd9d0737365799e5d1c962
depends_build port:bison \
port:flex \
port:gawk \
port:gperf \
port:grep \
path:bin/perl:perl5 \
port:pkgconfig \
port:texinfo
depends_lib port:curl \
port:fftw-3 \
port:fftw-3-single \
port:ftgl \
port:ghostscript \
port:glpk \
port:GraphicsMagick \
port:gnuplot \
port:gsed \
port:hdf5-18 \
port:less \
port:ncurses \
port:pcre \
port:qhull \
port:qrupdate \
port:readline \
port:SuiteSparse
depends_run port:epstool \
port:pstoedit
# allow us to disable checking for FLTK
# via the environment variable "FLTK_CONFIG"
patchfiles-append patch-configure.diff
universal_variant no
# octave requires a fortran compiler, so require the use of one of the
# MacPorts GCC ports (for now).
compiler.blacklist gcc-3.3 gcc-4.0 gcc-4.2 llvm-gcc-4.2 \
apple-gcc-4.0 apple-gcc-4.2 clang macports-clang-2.9 \
macports-clang-3.0 macports-clang-3.1 macports-clang-3.2 \
macports-clang-3.3 macports-llvm-gcc-4.2
configure.args --disable-dependency-tracking \
--without-x \
--disable-docs \
--with-cholmod="-lcholmod" \
--with-umfpack="-lumfpack -lSuiteSparse"
# octave uses a number of other ports to create sources from template:
# perl, gawk, gsed, flex, bison, texinfo. Make sure these are the
# MacPorts' versions. Python is not used if perl is available, so
# clear it out. grep is checked for in 'configure', but not used
# except inside that script; include it here for completion.
configure.perl ${prefix}/bin/perl
configure.python ' '
configure.awk ${prefix}/bin/gawk
configure.env-append GREP="${prefix}/bin/grep" \
FLTK_CONFIG=no \
SED="${prefix}/bin/gsed" \
TEXI2DVI="${prefix}/bin/texi2dvi" \
TEXI2PDF="${prefix}/bin/texi2pdf" \
APPLE_CXX="/usr/bin/g++"
configure.cppflags
configure.ldflags
pre-build {
reinplace "/'display\.cc'/s@\$(CXX)@\$(APPLE_CXX)@g" \
${worksrcpath}/src/Makefile
}
build.env-append APPLE_CXX="/usr/bin/g++"
test.run yes
test.target check
platform darwin 11 {
# 10.7 requires an extra patch; this patch will break the build on
# 10.6 and prior, so apply it only under 10.7.
patchfiles-append patch-src-display.cc.diff
}
platform darwin 12 {
# In 10.8 patch is required as above, also
# the LANG environment variable needs to
# be set to "C" otherwise /usr/bin/sed
# fails with an error, if you installed gsed
# with default name this should have no effect.
patchfiles-append patch-src-display.cc.diff
build.args-append LANG="C"
}
variant gcc43 description {build with the macports gcc43 toolchain} conflicts gcc48 gcc47 gcc46 gcc45 gcc44 g95 {}
variant gcc44 description {build with the macports gcc44 toolchain} conflicts gcc48 gcc47 gcc46 gcc45 gcc43 g95 {}
variant gcc45 description {build with the macports gcc45 toolchain} conflicts gcc48 gcc47 gcc46 gcc44 gcc43 g95 {}
variant gcc46 description {build with the macports gcc46 toolchain} conflicts gcc48 gcc47 gcc45 gcc44 gcc43 g95 {}
variant gcc47 description {build with the macports gcc47 toolchain} conflicts gcc48 gcc46 gcc45 gcc44 gcc43 g95 {}
variant gcc48 description {build with the macports gcc48 toolchain} conflicts gcc47 gcc46 gcc45 gcc44 gcc43 g95 {}
variant g95 description {build with g95} conflicts gcc48 gcc47 gcc46 gcc45 gcc44 gcc43 {
depends_build-append port:g95
configure.f77 "${prefix}/bin/g95"
}
variant atlas description {use BLAS from ATLAS} conflicts accelerate {
depends_lib-append port:atlas
}
variant accelerate description {use BLAS from Apple's Accelerate.framework} conflicts atlas {
depends_lib-append port:dotwrp
configure.args-append --with-blas="-ldotwrp -Wl,-framework -Wl,Accelerate"
configure.args-append --with-lapack="-Wl,-framework -Wl,Accelerate"
}
if {[variant_isset g95]} {
default_variants +accelerate
} elseif {![variant_isset accelerate]} {
default_variants +atlas
}
# check for GCC / G95 variants. The default here must match the
# default found in the 'atlas' port (but, this is not checked for).
# check for setting the default variant (gcc47)
if { ![variant_isset gcc43] && ![variant_isset gcc44] && \
![variant_isset gcc45] && ![variant_isset gcc46] && \
![variant_isset gcc47] && ![variant_isset gcc48] && \
![variant_isset g95] } {
default_variants +gcc47
}
# check if the user disabled just the default variant: -gcc47
if { ![variant_isset gcc43] && ![variant_isset gcc44] && \
![variant_isset gcc45] && ![variant_isset gcc46] && \
![variant_isset gcc47] && ![variant_isset gcc48] && \
![variant_isset g95] } {
pre-fetch {
error "You must select one of the compiler variants."
}
}
set gcc_version ""
if {[variant_isset gcc43]} {
set gcc_version "4.3"
} elseif {[variant_isset gcc44]} {
set gcc_version "4.4"
} elseif {[variant_isset gcc45]} {
set gcc_version "4.5"
} elseif {[variant_isset gcc46]} {
set gcc_version "4.6"
} elseif {[variant_isset gcc47]} {
set gcc_version "4.7"
} elseif {[variant_isset gcc48]} {
set gcc_version "4.8"
}
if {${gcc_version} != ""} {
set gcc_version_join [join [split ${gcc_version} "."] ""]
configure.ldflags "-L${prefix}/lib/gcc${gcc_version_join}"
configure.ldflags-append -lstdc++ \
-lgfortran
depends_build-append port:gcc${gcc_version_join}
configure.compiler macports-gcc-${gcc_version}
}
variant docs description {Enable creation and installation of documentation} {
depends_run-append port:texlive-basic
# latex needed for lcircle10 font etc.
depends_build-append port:texlive-latex
configure.args-replace s|--disable-docs|--enable-docs|
}
variant x11 description {Enable use of X11} {
configure.args-replace s|--without-x|--with-x|
configure.args-append --x-includes=${prefix}
}
variant fltk description {Include FLTK for graphical front-end} {
depends_lib-append path:lib/libfltk.dylib:fltk
configure.env-delete FLTK_CONFIG=no
}
livecheck.type regex
livecheck.url http://www.gnu.org/software/octave/news.html
livecheck.regex Version (\\d+(\\.\\d+)*)