TISEAN package

Porting TISEAN

This section will focus on demonstrating the capabilities of the TISEAN package. The previous information about the porting procedure has been moved here.

Tutorials

These tutorials are based on examples, tutorials and the articles located on the TISEAN website:
http://www.mpipks-dresden.mpg.de/~tisean/Tisean_3.0.1/.
This tutorial will utilize the following dataset:

• amplitude.dat

Please download it as the tutorial will reference it.

Nonlinear Prediction

In this section we will demonstrate some functions from the 'Nonlinear Prediction' chapter of the TISEAN documentation (located here). For now this section will only demonstrate functions that are connected to the Simple Nonlinear Prediction section.
There are three functions in this section: lzo_test, lzo_gm and lzo_run. The first is used to estimate the forecast error for a set of chosen parameters, the second gives the some global information about the fit and the third produces predicted points. Let us start with the first one (before completing starting this example remember to download 'amplitude.dat' from above and start Octave in the directory that contains it). The pairs of parameters (m,d) where chosen after the TISEAN documentation.

Code: Analyzing forecast errors for various parameters

# Load data load amplitude.dat # Create different forecast error results steps = 200; res1 = lzo_test (amplitude(1:end-200), 'm', 2, 'd', 6, 's', steps); res2 = lzo_test (amplitude(1:end-200), 'm', 3, 'd', 6, 's', steps); res3 = lzo_test (amplitude(1:end-200), 'm', 4, 'd', 1, 's', steps); res4 = lzo_test (amplitude(1:end-200), 'm', 4, 'd', 6, 's', steps); plot (res1(:,1), res1(:,2), 'r;m = 2, d = 6;', ... res2(:,1), res2(:,2), 'g;m = 3, d = 6;',... res3(:,1), res3(:,2), 'b;m = 4, d = 1;',... res4(:,1), res4(:,2), 'm;m = 4, d = 6;');

It seems that the last pair (m = 4, d = 6) is suitable. We will use it to determine the the best neighborhood to use when generating future points.

Code: Determining the best neighborhood size using lzo_gm

gm = lzo_gm (amplitude(1:end-200), 'm', 4, 'd', 6, 's', steps, 'rhigh', 20);

After analyzing gm it is easy to observe that the least error is for the first neighborhood size of gm which is equal to 0.49148. We will use it to produce the prediction vectors.

Code: Creating forecast points

steps = 200; forecast = lzo_run (amplitude(1:end-200), 'm', 4, 'd', 6, 'r', 0.49148, 'l', steps); forecast_noisy = lzo_run (amplitude(1:end-200), 'm', 4, 'd', 6, 'r', 0.49148, ... 'dnoise', 10, 'l', steps); plot (amplitude(end-199:end), 'g;Actual Data;', ... forecast, 'r.;Forecast data;',... forecast_noisy, 'bo;Forecast noisy data;');

As the difference between finding the proper r and not finding it is very small it can be for the most part omitted.
The produced data is the best local zeroth order fit on the amplitude.dat for (m = 4, d = 6).

Nonlinear Noise Reduction

This tutorial show different methods of the 'Nonlinear Noise Reduction' section of the TISEAN documentation (located here). It shows the use of simple nonlinear noise reduction (function lazy) and locally projective nonlinear noise reduction (function ghkss). To start let's create noisy data to work with.

Code: Creating a noisy henon map

hen = henon (10000); hen = hen(:,1); # We only need the first column hen_noisy = hen + std (hen) * 0.02 .* (-6 + sum (rand ([size(hen), 12]), 3));

This created a Henon map contaminated by 2% Gaussian noise à la TISEAN. In the tutorials and exercises on the TISEAN website this would be equivalent to calling makenoise -%2 on the Henon map.
Next we will reduce the noise using simple nonlinear noise reduction lazy.

Code: Simple nonlinear noise reduction

clean = lazy (hen_noisy,7,-0.06,3); # Create delay vectors for both the clean and noisy data delay_clean = delay (clean); delay_noisy = delay (hen_noisy); # Plot both on one chart plot (delay_noisy(:,1), delay_noisy(:,2), 'b.;Noisy Data;','markersize',3,... delay_clean(:,1), delay_clean(:,2), 'r.;Clean Data;','markersize',3)

On the chart created the red dots represent cleaned up data. It is much closer to the original than the noisy blue set.
Now we will do the same with ghkss.

Code: Locally projective nonlinear noise reduction

clean = ghkss (hen,'m',7,'q',2,'r',0.05,'k',20,'i',2);

The rest of the code is the same as the code used in the lazy example.
Once both results are compared it is quite obvious that for this particular example ghkss is superior to lazy. The TISEAN documentation points out that this is not always the case.

External links

• Bitbucket repository where the porting is taking place.
• TISEAN package website where the package is described along with references to literature, tutorials and manuals.